Philips B5/37 User manual - Page 10
Connect and set up, Charge portable speakers, Pair up with subwoofer/speakers
View all Philips B5/37 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
3 Connect and set up This section helps you connect your SoundBar to a TV and other devices, and then set it up. For information about the basic connections of your SoundBar and accessories, see the quick start guide. Note •• For identification and supply ratings, see the type plate at the back or bottom of the product. •• Before you make or change any connections, make sure that all devices are disconnected from the power outlet. Charge portable speakers If the portable left/right speaker is undocked from the main unit, its battery level is indicated by the LED on the speaker. • Light up white: full battery or more than 30% capacity remaining • Light up red: low battery level, less than 30% remaining • Flash red: near empty, less than 10% remaining 1 Dock your portable speakers into the main unit to charge. 2 Turn on the main unit. »» During charging, the LED on the portable speaker lights up orange. 8 EN »» When fully charged, the LED on the portable speaker lights up white for 10 seconds. Note •• It may take around two hours to fully charge the portable speakers. •• Battery performance varies due to many factors including volume, sound setting and media played. Pair up with subwoofer/ speakers The wireless speakers and subwoofer automatically pair up with the SoundBar for wireless connection when you turn on the SoundBar, the portable speakers and the subwoofer. If no audio from the wireless speakers and subwoofer can be heard, manually pair up the portable speakers and the subwoofer. Pair up with the subwoofer 1 Turn on the SoundBar and the subwoofer. »» If the connection to the SoundBar is lost, the indicator on the subwoofer blinks white slowly. 2 Press the CONNECT (connect) button on the subwoofer to enter the pairing mode. »» The indicator on the subwoofer blinks white quickly. 3 In OPTICAL mode (press OPTICAL) , within six seconds, on the remote control, press twice then Volume + once, and then hold down BASS +. »» If the pairing succeeds, the indicator on the subwoofer lights up white. »» If the pairing fails, the indicator on the subwoofer blinks white slowly. 4 If the pairing fails, repeat the steps above.