Philips B5/37 User manual - Page 21

7 Wall mount your SoundBar Before you mount your SoundBar on the wall, read all safety precautions. Wall mount Note •• You must detach the portable speakers from the main unit before wall mounting or un-mounting. •• Improper wall mounting may result in accident, injury or damage. If you have any query, contact Consumer Care in your country. •• Secure the wall mount to a wall that can support the combined weight of the product and the wall mount. •• Before wall mount, you need not remove the four rubber feet at the bottom of the soundbar, otherwise the rubber feet cannot be fixed back. Screw length/diameter Depend on the type of wall mounting this wall mount bracket, make sure that you use screws of a suitable length and diameter. 3 - 3.5mm > 25mm See the illustration on the separate wall mount sheet on how to wall mount the SoundBar. 1) Drill holes on the wall. 2) Secure the wall bracket on the wall with the dowels and screws. 3) Hang the SoundBar on the wall bracket. 8 Product specifications Note •• Specifications and design are subject to change without notice. Amplifier • FTC total output power: 94 W • Front Left + Right: 22 W (1% THD, 8ohm, 150 Hz-20 kHz) • Surround Left + Right: 22 W (1% THD, 8ohm, 150 Hz-20 kHz) • Subwoofer: 50 W (1% THD, 4 ohm, 40 Hz-100 Hz) • Total output power: 210 W RMS (+/- 0.5 dB, 30% THD) / 168 W RMS (+/- 0.5 dB, 10% THD) • Frequency response: 20 Hz-20 kHz / ±3 dB • Signal-to-noise ratio: > 65 dB (CCIR) / (A-weighted) • Input sensitivity: • AUX: 750 mV • AUDIO IN: 400 mV Audio • S/PDIF Digital audio input: • Coaxial: IEC 60958-3 • Optical:TOSLINK Bluetooth •• Bluetooth profiles: A2DP •• Bluetooth version: 2.1 + EDR Main unit •• Power supply: 110-240 V~, 50-60 Hz •• Power consumption: 50 W •• Standby power consumption: ≤ 0.5 W EN 19 English