Philips BDM4350UC User manual - Page 13

2. Setting up the Display 2. Toggle to the up or down to select main menu [PIP / PBP], then toggle to the right to confirm. 3. Toggle to the up or down to select [PIP / PBP Mode], then toggle to the right. 4. Toggle to the up or down to select [Off], [PIP], [PBP 2Win], [PBP 3Win] or [PBP 4Win], then toggle to the right. 5. Now you can move backward to set the [Off], [PIP], [PBP 2Win], [PBP 3Win] or [PBP 4Win]. 6. Toggle to the right to confirm your selection. MultiView in OSD menu • PIP / PBP Mode: There are five modes for MultiView: [Off], [PIP], [PBP 2Win], [PBP 3Win] and [PBP 4Win]. [PIP]: P icture in Picture Open up a sub-window side-by-side of other signal source. B A (main) When the sub source is not detected: B A (main) [PBP 2Win]: P icture by Picture Open up a sub-window side-by-side of other signal sources. A B (main) When the sub source is not detected. A (main) [PBP 3Win]: Picture by Picture Open up two subwindows of other sources. B A (main) C When the sub sources are not detected. A (main) [PBP 4Win]: Picture by Picture A B Open up three sub- windows of other signal (main) sources. CD When the sub sources are not detected. A (main) Note The black strip shows on the top and the bottom of the screen for the correct aspect ratio when in the PBP mode. • PIP Size: When PIP is activated, there are three sub-window sizes to choose: [Small], [Middle], [Large]. BSmall Middle A Large (main) • PIP Position: When PIP is activated, there are four sub-window positions to choose. Top-Right Bottom-Right 11