Philips CD1552B User manual - Page 29

Handset locating

Page 29 highlights

2 If there are more than 2 registered handsets, the handset numbers which are available for intercom will be displayed. Press the specific handset r v number you wish to call. 3 Press or key on the called handset to answer the internal call, where both internal callers can talk. i • Intercom is established. 4 Press and hold key for 2 seconds on the first handset to start the three-party conference. • CONFERENCE will be displayed on the screen once the conference call is established. Tip v To establish intercom using handsfree mode, press key again on the called handset to turn on speakerphone. 6.9 Handset locating The paging feature enables you to locate a missing handset if the handset is in range V and contains charged batteries. 1 Press key on the base station. • All the registered handsets start to ring. 2 Once retrieved, press any key on the handset to end the handset locating. Note If there are no key presses within 30 seconds, the handset and base station will automatically return to idle mode. V Tip Press key on the base station again to stop handset locating. Use more of your phone 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49

Use more of your phone
27
If there are more than 2 registered
handsets, the handset numbers which
are available for intercom will be
displayed. Press the specific handset
number you wish to call.
Press
r
or
v
key on the called
handset to answer the internal call,
where both internal callers can talk.
Intercom is established.
Press and hold
i
key for 2
seconds on the first handset to start
the three-party conference.
CONFERENCE
will be displayed on
the screen once the conference call
is established.
Tip
To establish intercom using handsfree
mode, press
v
key again on the called
handset to turn on speakerphone.
6.9
Handset locating
The paging feature enables you to locate
a missing handset if the handset is in range
and contains charged batteries.
Press
V
key on the base station.
All the registered handsets start to
ring.
Once retrieved, press any key on the
handset to end the handset locating.
Note
If there are no key presses within 30
seconds, the handset and base station will
automatically return to idle mode.
Tip
Press
V
key on the base station again
to stop handset locating.
2
3
4
1
2