Philips DC190 User manual - Page 11

2 Place the iPod in the dock. 3 Start to play the device (see the device user manual). English 5 Listen to radio Note • Only FM radio reception is available on this unit. Remove the iPod 1 Pull the iPod out of the dock. Listen to the iPod 1 Ensure that the iPod is loaded correctly. 2 Press SOURCE repeatedly to select iPod source. » The connected iPod plays automatically. • To pause/resume play, press . • To skip to a track, press / . • To search during play, press and hold / , then release to resume normal play. Charge the iPod When the unit is connected to power, the docked iPod begins to charge. Play from an external device You can also listen to an external audio device through this unit. 1 Press SOURCE repeatedly to select MP3 link source. 2 Connect the supplied MP3 link cable to: • the MP3-LINK jack (3.5mm) on the back of the unit. • the headphone jack on an external device. Tune to a radio station Tip • Position the antenna as far as possible from TV, VCR or other radiation source. • For optimal reception, fully extend and adjust the position of the antenna. 1 Press SOURCE repeatedly to select FM tuner. 2 Press and hold TUNING +/- for more than 2 seconds. » The radio tunes to a station with strong reception automatically. 3 Repeat step 2 to tune to more stations. • To tune to a weak station, press TUNING +/- repeatedly until you find optimal reception. Program radio stations automatically You can program a maximum of 20 preset radio stations. 1 In the tuner mode, press and hold TIME SET/AUTO SCAN for more than 2 seconds to activate automatic program mode. » All available stations are programmed in the order of waveband reception strength. » The first programmed radio station is broadcast automatically. EN 11