Philips DC190 User manual - Page 12

Program radio stations manually You can program a maximum of 20 preset radio stations. 1 Tune to a radio station. 2 Press TIME SET/AUTO SCAN to activate the program mode. » The preset number begins to blink. 3 Press PRESET +/- to select a number. 4 Press TIME SET/AUTO SCAN to confirm. 5 Repeat the above steps to program other stations. Note • To overwrite a programmed station, store another station in its place. Select a preset radio station 1 Press PRESET +/- to select a preset number. 6 Other features Set the alarm timer You can set two alarms which go off at different time. 1 Ensure that you have set the clock correctly. 2 Press and hold ALARM 1 or ALARM 2 for 2 seconds. » or and hour digits begin to blink. 3 Press TUNING +/- repeatedly to set the hour. 4 Press ALARM 1 or ALARM 2 to confirm. » or and minute digits begin to blink. 12 EN 5 Repeat steps 3-4 to set the minute. 6 Repeat steps 3-4 to select whether to ring alarm on weekdays or at weekend. » "L XX(volume level)" begins to blink. 7 Repeat steps 3-4 to set the maximum alarm volume. Set alarm mode 1 Adjust the WAKE TO iPod/RADIO/ BUZZ control to select the source for the alarm. » When the alarm time comes, the selected iPod, radio or buzzer turns on. Tip • If iPod source is selected but no iPod is loaded, the buzzer is selected automatically. Activate and deactivate the alarm timer 1 Press ALARM 1 or ALARM 2 repeatedly to activate the timer. » If the timer is activated, or is displayed. • To deactivate the alarm timer, press ALARM 1 or ALARM 2 repeatedly until is displayed. » If the timer is deactivated, or disappears. Repeat alarm 1 When the alarm rings, press REPEAT ALARM/BRIGHTNESS CONTROL. » The alarm repeats ringing minutes later. Tip • You can press TUNING+/- to adjust interval to repeat alarm.