Philips DC570 User manual - Page 11

English Preparations Connecting a USB device By connecting a USB mass storage device (including USB flash memory, USB flash players) to the system, you can enjoy the device's stored music through the powerful speakers of system. Insert the USB device's USB plug into the socket on the set. OR for devices with USB cables: 1 Insert one plug of the USB cable (not supplied) to the socket on the set. 2 Insert the other plug of the USB cable to the USB port of the USB device. Before using the remote control 1 Pull out the plastic protective sheet. 2 Select the source you wish to control by pressing one of the source select keys on the remote control (for example USB,TUNER). 3 Then select the desired function (for example ...≈ ). Connecting other equipment to your system Use a line-in-cable to connect AUX IN to the analogue audio out terminals of an external equipment (TV,VCR, Laser Disc player, DVD player or CD Recorder). Replacing the remote control battery (lithium CR2025) 1 Press the slot on the battery compartment. 2 Pull out the battery compartment. 3 Replace a new battery and fully inser t the battery compartment back to the original position. 1 2 CR2025 3 CAUTION! - Remove battery if it is exhausted or will not be used for a long time. - Batteries contain chemical substances, so they should be disposed of properly. - Perchlorate Material-special handling may apply. See www.dtsc.ca.gov/ hazardouswaste/perchlorate. 11