Philips DC570 User manual - Page 20

Clock/Timer/Sleep English POWER TUNER TUNING + TUNING USB MENU AUX SHUFFLE REPEAT TIMER DSC ALBUM/ PRESET DBB PROG SET TIME VOL SLEEP MUTE Clock setting The clock uses the 12-hour mode. Impor tant! - To set clock in the Eco Power mode, press and hold POWER on the set for 3 seconds or more to switch to normal standby mode first before proceeding with the procedures below. 1 In standby mode, press PROG/SET TIME for more than two seconds. ➜ The clock digits flash. 2 Press S/T to set the minutes. 3 Press TUNING -/+ to set the hours. 4 Press PROG/SET TIME to confirm the time. Setting the timer You can only set timer in standby mode. Wake up to FM radio or music from your USB device or iPod.The clock time needs to be set first before the alarm clock can be used. 1 Press TIMER for more than 3 seconds to enter the alarm setting mode. ➜ appears. ➜ The alarm clock digits flash. ➜ "Err" appears briefly if you have not set the clock time. 2 Press TUNING +/- to set the hours. 3 Press S/T to set the minutes. 4 Press iPod, TUNER or USB to select the sound source. 5 Press TIMER to confirm your alarm setting. ➜ The display returns to the clock time. Notes: The TUNER mode is the default source if: - Your USB device contains no MP3 or WMA files. - You forgot to connect a USB device. - You forgot to dock your iPod. Stopping the alarm ● To cancel the alarm, press TIMER in standby or playback mode. ➜ appears if activated, and disappears if deactivated. Sleep timer setting The sleep timer enables the system to switch off by itself after a set period of time. 1 Press SLEEP on the remote control repeatedly to select a preset time. ➜ The selections are as follows (time in minutes): 120 ™ 90 ™ 60 ™ 30™ 15 ™OFF... ➜SLEEP is displayed. 2 To review the remaining sleep time, press SLEEP . Note: - If you press SLEEP again, this will change your sleep time period to the next shorter preset option. To deactivate the sleep timer ● Press SLEEP repeatedly until "0FF" is displayed, or press Power. 20