Philips DC570 User manual - Page 14

Basic Functions English POWER TUNER TUNING + TUNING USB MENU AUX SHUFFLE REPEAT TIMER DSC ALBUM/ PRESET DBB PROG SET TIME VOL SLEEP MUTE Important! Before you operate the system, complete the preparation procedures. Switching the system to Standby mode ● Press Power (or Power on the remote control). ➜ The volume level (up to a maximum volume of 12), last selected mode, source and tuner presets will be retained in the system's memory. Power Saving Automatic Standby As a power-saving feature, the system automatically switches to standby 15 minutes after a USB connected device has reached the end of the last track and no control is operated. Adjusting volume and sound 1 Press VOLUME -/+ to decrease or increase the volume. ➜ Display shows the volume level VoL and a number 0-32. 2 Press MUTE on the remote control to interrupt sound reproduction instantly. ➜ Playback will continue without sound and MUTE appears. ● To activate sound reproduction you can: - press MUTE again; - adjust the volume controls; - change source. Switching the system on ● Press Power on the set. ➜ The system will switch to the last selected source. ● Press source on the set repeatedly or USB, AUX, iPod or TUNER on the remote control. ➜ The system will switch to the selected source. Switching the system to Eco Power Standby mode ● Press and hold POWER (or POWER on the remote) in the active mode. ➜ The system enters Eco power standby mode. ● If the system is normal standby mode, press and hold POWER on the front panel for 3 seconds or more to switch to Eco power standby or vice versa. 14