Philips DC910 User manual - Page 20
Clock/Timer
UPC - 609585153790
View all Philips DC910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
English Clock/Timer Clock setting The clock can be set in either 12-hour or 24-hour mode (12HR or 24HR for example). 1 In standby mode, press and hold PROG/SET TIME on the remote control. 2 Press VOLUME+/- on the system (or VOL +/- on the remote control) to switch between 12 hour and 24 hour display. 3 Press PROG/SET TIME on the remote control again to confirm. ➜ The clock digits flash on the display panel. 4 Press VOLUME +/- on the system (or VOL +/- on the remote control) to set the hours. 5 Press PROG/SET TIME on the remote control again. ➜ The clock digits for the minutes flash. 20 6 Press VOLUME +/- on the system (or VOL +/- on the remote control) to set the minutes. 7 Press PROG/SET TIME on the remote control to confirm the time. Timer setting ● The system can be used as an alarm clock, whereby the TUNER (FM)/iPod/USB/CARD (SD/MMC) is switched on at a set time (one time operation). The clock time needs to be set first before the timer can be used. ● During setting, if no button is pressed within 30 seconds, the system will exit timer setting mode automatically. 1 In standby mode, press TIMER for more than two seconds. 2 Press SOURCE on the system repeatedly (or the respective source keys on the remote control) to select the sound source. 3 Press TIMER to confirm your desired mode. ➜ The clock digits for the hours flash. 4 Press VOLUME +/- on the system (or VOL +/- on the remote control) to set the hours. 5 Press TIMER again. ➜ The clock digits for the minutes flash. 6 Press VOLUME +/- on the system (or VOL +/- on the remote control) to set the minutes. 7 Press TIMER to confirm the time. ➜ The timer is now set and activated. Activating and deactivating timer ● In standby or during playback, press TIMER once on the remote control. ➜ Display shows if activated, and disappears if deactivated. Notes: - Timer is not available in AUX mode. - If USB/SD/MMC source is selected and no compatible USB/SD/MMC device is plugged, TUNER will be selected automatically.