Philips DVP4050 User Manual - Page 15

Getting Started Setting up Progressive Scan feature (for Progressive Scan TV only) The progressive scan display twice the number of frames per seconds than interlaced scanning (ordinary normal TV system). With nearly double the number of lines, progressive scan offers higher picture resolution and quality. IMPORTANT! Before enabling the progressive scan feature, you must ensure: 1) Your TV can accept progressive signals, a progressive scan TV is required. 2) You have connected the DVD player to your TV using Y Pb Pr (see page 9.) ACTIVATING PROGRESSIVE SCAN: 1. ENSURE YOUR TV HAS PROGRESSIVE SCAN. 2. CONNECT USING YPBPR (GBR) VIDEO CABLE. 3. IF THERE IS A DISTORTED PICTURE, WAIT 15 SECONDS FOR AUTO RECOVERY. Cancel OK 8 Press 1 to highlight OK in the menu and press OK to confirm. There will be a distorted picture on your TV at this state until you turn on the progressive scan mode on your TV. 9 Turn on your TV progressive scan mode (refer to your TV user manual.) ➜ The below menu appears on the TV. CONFIRM AGAIN TO USE PROGRESSIVE SCAN. IF THE PICTURE IS GOOD, PRESS OK BUTTON ON REMOTE. 1 Turn on your TV. 2 Turn off your TV progressive scan mode or turn on interlaced mode (refer to your TV user manual.) OK Cancel 3 Press POWER (B) on the remote control to turn on the DVD player. 0 Press 1 to highlight 4 Select the correct Video Input channel. (See page 14). ➜ The DVD background screen appears on the TV. in the menu OK and press OK to confirm. ➜ The set up is complete now and you can start enjoy the high quality picture. 5 Press SETUP. 6 Press 2 to select {VIDEO SETUP PAGE}. General Audio Video Preference To deactivate Progressive manually: G Wait for 15 seconds for auto recovery. OR 1 Press OPEN/CLOSE on the DVD player to open the disc tray. - - Video Setup Page - TY Type TV Display Progressive Sharpness Brightness Contrast Color On Off 2 Press numeric keypad '1' on the remote control for few seconds. ➜ The DVD background screen appears on the TV. Tip: - There are some progressive scan TV and High-Definition TV sets that are not fully compatible with this DVD system, resulting in the unnatural picture when playing back a DVD VIDEO disc in the progressive scan mode. In such a case, turn off the progressive scan feature on both the DVD player and your TV set. 7 Select {PROGRESSIVE} to {ON}, then OK to confirm. ➜ The instruction menu appears on the TV. TIPS: The underlined option is the factory default setting. Press 1 to go back to the previous menu item. Press SETUP to exit the menu item. 15 01-35_DVP4080_4060_4050_55_Eng 15 05/02/07, 9:37 AM English