Philips DVP4050 User Manual - Page 26

DVD Setup Menu Options Audio Setup Menu Digital Audio Setup The options included in Digital Audio Setup are: 'Digital Output' and 'LPCM Output'. English 1 In disc mode, press SETUP. 2 Press 1 2 to select 'Audio Setup'. 3 Press OK to confirm. General Audio Video Preference 1 In 'AUDIO SETUP PAGE', press 3 4 to - - Audio Setup Page - Downmix Digital Audio 2 Press the 3 4 keys to highlight an option. 3 Enter its submenu by pressing 2. 4 Press 3 4 to select a setting, then press OK to confirm your selection. highlight {DIGITAL AUDIO}, then press 2. Setting the Downmix This options allows you to set the stereo analog output of your DVD Player. 1 In 'AUDIO SETUP PAGE', press 3 4 to highlight {DOWNMIX}, then press 2. STEREO Select this to change channel output to stereo which delivers sound from only the two front speakers. LT/RT Select this option if your DVD Player is connected to a Dolby Pro-Logic decoder. Digital Output Set the Digital output according to your optional audio equipment connection. ➜ SPDIF Off: Turn off the digital output. ➜ All: If you have connected your DIGITAL AUDIO OUT to a multi-channel decoder/receiver. ➜ PCM Only: Only if your receiver is not capable of decoding multi-channel audio. Tip: - If DIGITAL OUTPUT is set to 'All', all audio settings except MUTE are invalid. LPCM Output If you connect the DVD Player to a PCM compatible receiver via the digital terminals, such as coaxial or optical etc, you may need to adjust 'LPCM'. Discs are recorded at a certain sampling rate. The higher the sampling rate, the better the sound quality. ➜ 48K: Playback a disc recorded at the sampling rate of 48kHz. ➜ 96K: Playback a disc recorded at the sampling rate of 96kHz. 2 Press 3 4 to select a setting, then press OK to confirm your selection. TIPS: The underlined option is the factory default setting. Press 1 to go back to the previous menu item. Press SETUP to exit the menu item. 26 01-35_DVP4080_4060_4050_55_Eng 26 05/02/07, 9:37 AM