Philips DVP4050 User Manual - Page 16

Getting Started Selecting the color system that corresponds to your TV This DVD Player is compatible with both NTSC and PAL. In order for a DVD disc to play on this Player, the color system of the Disc, the TV and the DVD Player should match. General Audio Video Preference 5 Select an item and press OK. English ➜ Follow the instructions shown on the TV to confirm the selection (if any). Tips: - Before changing the current TV Standard setting, ensure that your TV supports the 'selected TV Type' system. - If there is no proper picture on your TV, wait for 15 seconds for auto recovery. CHANGING NTSC TO PAL: 1. ENSURE THAT YOUR TV SUPPORTS PAL STANDARD. 2. IF THERE IS A DISTORTED PICTURE DISPLAYED ON THE TV, WAIT 15 SECONDS FOR AUTO RECOVER. OK CANCEL - - Video Setup Page - TY Type TV Display Progressive Sharpness Brightness Contrast Color PAL Multi NTSC CONFIRM AGAIN TO USE NEW TV TYPE SETTING. OK CANCEL 1 Press SETUP. 2 Press 2 to select {VIDEO SETUP PAGE}. 3 Press 3 4 to highlight {TV TYPE}, then press 2. below: PAL - Select this if the connected TV is PAL system. It will change the video signal of a NTSC disc and output in PAL format. NTSC - Select this if the connected TV is NTSC system. It will change the video signal of a PAL disc and output in NTSC format. Multi - Select this if the connected TV is compatible with both NTSC and PAL (multi-system). The output format will be in accordance with the video signal of the disc. To reset to default TV color system manually: G Wait for 15 seconds for auto recovery. OR 4 Press 3 4 to highlight one of the options 1 Press OPEN/CLOSE on the DVD player to open the disc tray. 2 Press numeric keypad '3' on the remote control for few seconds. ➜ The DVD background screen appears on the TV. TIPS: The underlined option is the factory default setting. Press 1 to go back to the previous menu item. Press SETUP to exit the menu item. 16 01-35_DVP4080_4060_4050_55_Eng 16 05/02/07, 9:37 AM