Philips DVP4050 User Manual - Page 33

Troubleshooting Disc can't be played - - - - The DVD+R/CD-R must be finalised. Ensure the disc label is facing up. Check if the disc is defective by trying another disc. If you have recorded a Picture CD or MP3 CD yourself, ensure that your disc contains at least 10 pictures or 5 MP3 tracks. - Region code incorrect. - Check the disc for fingerprints/scratches and clean with a soft cloth wiping from centre to edge. - Reset the unit by switching the player off, then on again. - Aim the Remote Control directly at the sensor on the front of the player. - Reduce the distance to the player. - Replace the batteries in the Remote Control. - Re-insert the batteries with their polarities (+/- signs) as indicated. - To completely reset the player, unplug the AC cord from the AC outlet for 5-10 seconds. - Operations may not be permitted by the disc. Refer to the instructions of the disc jacket. - Use a commonly available cleaning CD/DVD to clean the lens before sending the DVD Player for repair. - Press STOP twice before selecting System Menu. - Depending on the disc availability, some menu items cannot be selected. Picture freezes momentarily during playback No return to start-up screen when disc is removed The player does not respond to the Remote Control Buttons do not work Player does not respond to some operating commands during playback. DVD Player cannot read CDs/DVDs Menu items cannot be selected Visit us at www.philips.com/support for service support 33 01-35_DVP4080_4060_4050_55_Eng 33 05/02/07, 9:37 AM English Problem Solution