Philips FWP900 User manual - Page 11

Dolby Pro Logic

Page 11 highlights

English Dolby Pro Logic Dolby ProLogic Surround Sound provides the current industry standard for home cinema sound from VCR and TV broadcasts. The front left and right speakers deliver detailed, directional sound as the center speaker "steers" dialogue/ vocal sound and center screen action toward the TV screen. Both surround speakers add a greater sense of depth with special effects. Audio and video tapes and discs with the Dolby Surround mark are encoded for multi channel Dolby Surround sound. The DOLBY PRO LOGIC sound setting allows you to listen to audio tracks as they were recorded through the left, right, center, and rear channels. IMPORTANT! - Dolby Pro Logic Surround sound can only be reproduced if the program is broadcast in Dolby Surround Sound. - For the best Dolby Pro Logic sound, switch on DPL with DSC set to "Classic" and with VEC off. - Dolby Pro Logic mode will automatically switch to normal Stereo mode when headphones are connected. - When recording, switch to normal stereo mode. Setting up the Dolby Pro Logic system You must set up the system properly in order to experience and enjoy a Home Cinema sound ambience. Connecting the Speakers 5-Speakers Connection (refer to "Preparations - Rear Connections") G Front speakers: Connect the front speakers. G Center speaker: Connect the center speaker. G Rear (surround) speakers: Connect either the wired rear surround speakers or a pair of wireless rear speakers (not supplied) to the SURROUND OUT terminals. Positioning the Speakers To get the best surround sound effect, place the speakers as follows. FRONT LEFT SUBWOOFER CENTER SPEAKER MINI HIFI SYSTEM FRONT RIGHT TV SURROUND LEFT SURROUND RIGHT Front Left and Right Speakers For the best sound, place the left and right speakers at an angle of approximately 45 degrees to the listener. Note: - To avoid magnetic interference with the picture on your TV, do not position the front speakers too close to the TV. Rear (surround) Speakers The surround speakers should be placed at normal listening ear level or mounted on the wall at the back of the room. Most importantly, experiment when placing the surround speakers to obtain the best sound. Center Speaker For the best sound, place the center speaker at the same height as the left and right speakers. Place the center speaker directly above or beneath the television. Test Tone This feature enables you to adjust the Front Left, Front Right, Center and Surround Sound levels of the respective speakers in Dolby Pro Logic mode. You must sit at the ideal sitting position and use the remote control to perform this operation. 1 Press CD, TUNER, TAPE or AUX to switch on the system. 2 Press TEST TONE. REPEAT S ➜ A test signal is generated; it will move through the Left, Center, Right, and Surround speakers. DPL TEST TONE BA L CENTER R + pg 001-033/P900/37-Eng 11 11 12/8/00, 1:52 PM 3139 115 20411

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33

11
English
3139 115 20411
Dolby ProLogic Surround Sound provides the
current industry standard for home cinema
sound from VCR and TV broadcasts.
The front
left and right speakers deliver detailed, directional
sound as the center speaker "steers" dialogue/
vocal sound and center screen action toward the
TV screen.
Both surround speakers add a
greater sense of depth with special effects.
Audio and video tapes and discs with the
Dolby Surround mark are
encoded for multi channel Dolby Surround
sound.
The DOLBY PRO LOGIC sound setting
allows you to listen to audio tracks as they were
recorded through the left, right, center, and rear
channels.
IMPORTANT!
Dolby Pro Logic Surround sound can only
be reproduced if the program is broadcast
in Dolby Surround Sound.
For the best Dolby Pro Logic sound,
switch on DPL with DSC set to
Classic
and with VEC off.
Dolby Pro Logic mode will automatically
switch to normal Stereo mode when
headphones are connected.
When recording, switch to normal stereo
mode.
Setting up the Dolby Pro Logic
system
You must set up the system properly in order to
experience and enjoy a Home Cinema sound
ambience.
Connecting the Speakers
5-Speakers Connection
(refer to
Preparations - Rear Connections
)
Front speakers:
Connect the front speakers.
Center speaker:
Connect the center speaker.
Rear (surround) speakers:
Connect either the
wired rear surround speakers or a pair of
wireless rear speakers (not supplied) to the
SURROUND OUT terminals.
Positioning the Speakers
To get the best surround sound effect, place the
speakers as follows.
TV
CENTER
SPEAKER
SURROUND
RIGHT
SURROUND
LEFT
FRONT
LEFT
FRONT
RIGHT
MINI HIFI
SYSTEM
SUB-
WOOFER
Front Left and Right Speakers
For the best sound, place the left and right
speakers at an angle of approximately 45
degrees to the listener.
Note:
To avoid magnetic interference with the picture
on your TV, do not position the front speakers too
close to the TV.
Rear (surround) Speakers
The surround speakers should be placed at
normal listening ear level or mounted on the
wall at the back of the room. Most importantly,
experiment when placing the surround speakers
to obtain the best sound.
Center Speaker
For the best sound, place the center speaker at
the same height as the left and right speakers.
Place the center speaker directly above or
beneath the television.
Test Tone
This feature enables you to adjust the Front Left,
Front Right, Center and Surround Sound levels
of the respective speakers in Dolby Pro Logic
mode.
You must sit at the ideal sitting position and
use the remote control to perform this
operation.
1
Press
CD
,
TUNER
,
TAPE
or
AUX
to switch
on the system.
2
Press
TEST TONE
.
A test signal is generated; it
will move through the Left,
Center, Right, and Surround
speakers.
Dolby Pro Logic
BA
CENTER
R
DPL
TEST TONE
S
REPEAT
L
+
pg 001-033/P900/37-Eng
12/8/00, 1:52 PM
11