Philips HD8325 User manual - Page 20

Descaling, Disposal

Page 20 highlights

10 DESCALING Limescale builds up with the use of the appliance; the machine needs descaling every 1-2 months and/or whenever a reduction in water flow is noticed. Use the Saeco descaling solution only. In case of conflict, priority must be given to what is indicated in the operation and maintenance manual over the instructions provided on separately sold accessories and materials. Use the Saeco descaling solution (Fig.B). Its formula has been designed to ensure better machine performance and operation for its whole operating life. If correctly used, it also avoids alterations in the brewed product. Before starting a descaling cycle make sure that: THE WATER FILTER (if used) HAS BEEN REMOVED. Never drink the descaling solution or any products dispensed until the cycle has been carried out to the end. Never use vinegar as a descaling solution. 1 (Fig.13-14) - Insert the filter holder into the brew unit (8) from the bottom and turn it from left to right until it locks into place. 2 (Fig.1B) - Remove and empty the water tank. 3 (Fig.2) - Pour HALF the content of the Saeco concentrated descaling solution into the water tank, then fill the tank with fresh drinking water up to the MAX level. 4 Switch on the machine by pressing the ON/OFF button (11) and switch it to the "I" position. (Fig.21) - Fill up (as described in Section 7 of the manual) 2 cups of water (about 150 ml each) from the steam / hot water wand and turn off the machine by pressing and switching the ON/OFF button (11) to the "0" position. 5 Let the descaling solution sit for about 15-20 minutes with the machine off. 6 Switch on the machine by pressing the ON/OFF button (11). (Fig.21) - Fill up (as described in Section 7 of the manual) two cups of water (about 150 ml each) from the steam / hot water wand. Then turn the machine off by means of the ON/OFF button (11) and leave it off for 3 minutes. 7 Repeat the operations described in step 6 until the water tank is completely empty. 8 (Fig.2) - Rinse the tank and fill it completely with fresh drinking water. 9 Place a container under the filter holder. 10 Switch on the machine by pressing the ON/OFF button (11); turn the selection knob (17) to the " " position and, by means of the filter holder, dispense the whole content of the tank. Set the selection knob (17) to the " " position to stop dispensing. 11 (Fig.2) - Fill the tank again with fresh water. (Fig.21) - Place a large enough container under the steam wand (Pannarello). Open the water dispensing knob (3) by turning it counter-clockwise. (Fig.22) - Turn the selection knob (17) to the " " position and dispense the whole content of the tank by means of the steam / hot water wand. 12 (Fig.23) - After dispensing water, set the selection knob (17) to the " " position to stop dispensing. (Fig.24) - Close the water dispensing knob (3) by turning it clockwise. 13 Repeat the operations from point (8) once again for a total of 4 tanks. 14 (Fig.19) - Remove the filter holder from the unit by turning it from right to left and rinse it with fresh drinking water. The descaling cycle is now complete. (Fig.2) - Fill the tank again with fresh water. If necessary, prime the circuit as described in Section 4.5. The descaling solution must be disposed of according to the manufacturer's instructions and/or regulations in force in the country of use. 11 DISPOSAL - The packing materials can be recycled. - Appliance: Unplug the appliance and cut the power cord. - Deliver the appliance and power cord to a service center or public waste disposal facility. This product complies with eu directive 2002/96/EC. The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. • 20 •

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104

• 20 •
10
DESCALING
Limescale builds up with the use of the appliance; the machine
needs descaling every 1-2 months and/or whenever a reduction
in water flow is noticed. Use the Saeco descaling solution only.
In case of conflict, priority must be given
to what is indicated in the operation and
maintenance manual over the instructions provided on
separately sold accessories and materials.
Use
the
Saeco
descaling
solution
(Fig.B).
Its
formula
has
been
designed
to
ensure
better machine performance and operation for its
whole operating life. If correctly used, it also avoids
alterations in the brewed product. Before starting a
descaling cycle make sure that: THE WATER FILTER (if
used) HAS BEEN REMOVED.
Never drink the descaling solution or any
products dispensed until the cycle has been
carried out to the end. Never use vinegar as a descaling
solution.
1
(Fig.13-14) -
Insert the filter holder into the brew unit (8)
from the bottom and turn it from left to right until it locks
into place.
2
(Fig.1B) -
Remove and empty the water tank.
3
(Fig.2) -
Pour
HALF
the content of the Saeco concentrated
descaling solution into the water tank, then fill the tank
with fresh drinking water up to the MAX level.
4
Switch on the machine by pressing the ON/OFF button (11)
and switch it to the "I" position.
(Fig.21) -
Fill up (as described in Section 7 of the manual)
2 cups of water (about 150 ml each) from the steam / hot
water wand and turn off
the machine by pressing and
switching the ON/OFF button (11) to the "0" position.
5
Let the descaling solution sit for about 15-20 minutes with
the machine off.
6
Switch on the machine by pressing the ON/OFF button (11).
(Fig.21) -
Fill up (as described in Section 7 of the manual)
two cups of water (about 150 ml each) from the steam /
hot water wand. Then turn the machine off
by means of
the ON/OFF button (11) and leave it off
for 3 minutes.
7
Repeat the operations described in
step 6
until the water
tank is completely empty
.
8
(Fig.2) -
Rinse the tank and fill it completely with fresh
drinking water.
9
Place a container under the filter holder.
10
Switch on the machine by pressing the ON/OFF button (11);
turn the selection knob (17) to the "
" position and, by
means of the filter holder, dispense the whole content of
the tank. Set the selection knob (17) to the "
" position to
stop dispensing.
11
(Fig.2)
- Fill the tank again with fresh water.
(Fig.21)
- Place a large enough container under the steam
wand (Pannarello). Open the water dispensing knob (3) by
turning it counter-clockwise.
(Fig.22)
- Turn the selection knob (17) to the "
"
position and dispense the whole content of the tank by
means of the steam / hot water wand.
12
(Fig.23)
- After dispensing water, set the selection knob
(17) to the "
" position to stop dispensing.
(Fig.24)
- Close the water dispensing knob (3) by turning it
clockwise.
13
Repeat the operations from
point (8)
once again for a total
of 4 tanks.
14
(Fig.19) -
Remove the filter holder from the unit by turning
it from right to left and rinse it with fresh drinking water.
The descaling cycle is now complete.
(Fig.2)
- Fill the tank again with fresh water. If necessary,
prime the circuit as described in Section 4.5.
The descaling solution must be disposed of
according to the manufacturer’s instructions
and/or regulations in force in the country of use.
11
DISPOSAL
-
The packing materials can be recycled.
-
Appliance: Unplug the appliance and cut the power cord.
-
Deliver the appliance and power cord to a service center or
public waste disposal facility.
This product complies with eu directive 2002/96/EC.
The symbol
on the product or on its packaging
indicates that this product may not be treated as household
waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic
equipment.
By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment
and human health, which could otherwise be caused by
inappropriate waste handling of this product. For more
detailed information about recycling of this product, please
contact your local city offi
ce, your household waste disposal
service or the shop where you purchased the product.