Philips HTS3372D User manual - Page 12
Option 2: Connect to the component, video jack, Option 1: Connect to the HDMI jack - remote
UPC - 609585170100
View all Philips HTS3372D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Option 1: Connect to the HDMI jack Option 2: Connect to the component video jack HDMI OUT HDMI IN 1 Connect an HDMI cable (not supplied) to the HDMI OUT jack on this Home Theater System and the HDMI input jack on the TV. Note • If your device supports HDMI CEC, you can control compliant devices with a single remote control. (see 'Get started' > 'Use Philips EasyLink'). Tip • If the TV has a DVI connection only, connect via a HDMI/DVI adaptor. Connect an audio cable for sound output. • You can optimize the video output. (see 'Adjust settings' > 'Video setup' > [HDMI Setup]). • This type of connection provides the best picture quality. Pr Pb Y VIDEO OUT Pr Pb Y 1 Connect the component video cable (not supplied) to the Y Pb Pr jacks on this Home Theater System and the COMPONENT VIDEO input jacks on the TV. • If a progressive scan TV is used, you may turn on the progressive scan mode. (see 'Get started' > 'Turn on Progressive Scan'). Note • The component video input jack on the TV might be labeled as Y Pb/Cb Pr/Cr or YUV. • This type of connection provides good picture quality. 12 EN