Philips HTS3372D User manual - Page 13

English Connect Option 3: Connect to the Video (CVBS) jack Option 4: Connect to the RF modulator VIDEO VIDEO OUT VIDEO VIDEO IN 1 Connect a composite video cable to the VIDEO jack on this Home Theater System and the VIDEO input jack on the TV. Note • The video input jack on the TV might be labeled as A/V IN, VIDEO IN, COMPOSITE or BASEBAND. • This type of connection provides standard picture quality. If your TV only has a single Antenna Input jack (labeled as 75 ohm or RF In), use a RF modulator to view the disc play on the TV. 1 Connect a composite video cable (yellow) from the VIDEO jack on this Home Theater System to the video input jack on RF modulator. 2 Connect a RF coaxial cable (not supplied) from the ANTENNA OUT or TO TV jack on the RF modulator to the ANTENNA IN jack on your TV. 3 If the off-air antenna or Cable TV service signal is connected to your TV, disconnect it from your TV and connect it to the ANTENNA IN or RF IN jack on the RF modulator. Tip • See your electronics retailer or contact Philips for details about RF modulator availability and operations. EN 13