Philips HTS3372D User manual - Page 38

[EasyLink Setup] If this Home Theater System is connected to HDMI CEC compliant TV/devices, all connected devices can respond to the following commands simultaneously: Option Description [EasyLink] Turns off or on all EasyLink features. To disable this feature, select [Off]. [One Touch When you press PLAY, the Play] TV and Home Theater System are turned on. Disc play starts if there is a disc in the Home Theater System. To disable this feature, select [Off]. [One Touch When you press and hold Standby] STANDBY for at least three seconds, connected HDMI CEC devices simultaneously switch to standby. To disable this feature, select [Off]. [System When you play audio that is Audio routed from the connected Control] devices, this Home Theater System switches to the corresponding audio source automatically. To enable this feature, select [On]. Then proceed to [Audio Input Mapping] to scan and map all the connected devices. [Audio Input When you map the audio Mapping] input correctly, this Home Theater System switches to the audio from the played device automatically. Note • You must turn on the HDMI CEC operations on the TV/devices before you can enjoy the EasyLink controls. See the TV/devices manual for details. • Philips does not guarantee 100% interoperability with all HDMI CEC compliant devices. [Disc Lock] Sets play restriction for a speciÀc discs. Before you start, place the disc in the disc compartment (maximum 40 discs can be locked). • [Lock] - Restricts access to the current disc. Once activated, a password is needed to unlock and play the disc. • [Unlock] - Plays all discs. Tip • You can set or change the password (see 'Adjust settings' > 'Preferences' > [Password]). [Display Dim] Changes the brightness level of the display panel on this Home Theater System. • [100%] - Normal brightness. • [70%] - Medium brightness. • [40%] - Dimmest display. [OSD Language] Selects the default on-screen menu language. [Screen Saver] Turns off or on the screen saver mode. Helps to protect the TV screen from being damaged due to over exposure to a static image for too long. • [On] - Sets the screen saver to appear after 5 minutes of inactivity (for example, in pause or stop mode). • [Off] - Disable screen saver mode. [Sleep Timer] Switches to standby automatically after the preset time. • [15 mins], [30 mins], [45 mins], [60 mins] - Selects the count down time before the Home Theater System switches to standby. • [Off] - Disables sleep timer mode. 38 EN