Philips HTS5100B User manual - Page 38

LIST OF SETTINGS Category Play Disc Setup Custom Audio & Video Menus/Options TV Shape • Refer to page 43 for more information. 4:3 Letter Box 4:3 Pan & Scan 16:9 Widescreen 16:9 Squeeze BD-Video 24p Output • This feature is available only when the display device is connected by an HDMI cable. • Refer to page 41 for more information. Auto Off Still Mode Auto Field Frame Blu-ray Disc Audio Mix Audio Output Primary Audio Only Parental Rating Level • Refer to page 43 for more information. Password Change Other Media Select Slide Show Interval All 8 [Adult] to 1 [Kid Safe] Password Input Disc SD Card 5sec 10sec Description Sets the aspect ratio of the playback image to fit your TV. "Auto": Outputs the picture in 1080p/24 (1080 progressive with 24 frames per second) when it meets all the conditions listed below: • The video resolution and the frame rate of the material is 1080p/24 . • "Video Resolution" setting is set to "Auto". • The display device supports the 1080p/ 24 output. "Off": Outputs the picture in 60p. (60 frames per second, progressive) Adjusts picture resolution and quality in still mode. "Auto": Automatically selects the best resolution setting ("Frame" or "Field") based on the data characteristics of the pictures. "Field": Stabilizes the pictures, although the picture quality may become coarse due to the limited amount of data. Select "Field" when the pictures are still unstable even if "Auto" is selected. "Frame": Displays relatively motionless pictures in higher resolution. "Frame" improves the picture quality, although it may unstabilize the pictures due to alternate output of 2-field data. "Mix Audio Output": The audio for the secondary video and the interactive application will be output together with the audio for the primary video. "Primary Audio Only": Only the audio for the primary video will be output. When playing back a BD-video which only contains the primary audio, the audio output will be the same case as the "Primary Audio Only" even if the "Blu-ray Disc Audio" is set to "Mix Audio Output". Sets the rating level for the disc playback. Select the media to playback. Sets the amount of time for displaying one picture before switching to the next one. For example, select "5sec" to switch the picture every 5 seconds. 38 EN