Philips HTS5100B User manual - Page 49

Introduction Connections POWER Basic Setup Playback TROUBLESHOOTING Problem No reaction to the remote control. No video signal on the display device. No audio / video signal on the display device via HDMI cable. No high-definition video signal on the TV. No audio signal from the loudspeakers of the TV. No audio signal from the speaker system. Tip Connect the product to the power outlet. Point the remote control at the product. Insert the batteries correctly. Insert new batteries in the remote control. Turn on the TV. Set the TV to the correct external input. Select the correct video resolution in video setup. Press and hold [B (PLAY)] on the front panel for 5 seconds to change the setting back to its default. If the unit is connected to the unauthorized display device with an HDMI cable, the audio/video signal may not be output. Does the disc contain high-definition video? High-definition video is not available when the disc does not contain it. Does the TV support high-definition video? High-definition video is not available when the TV does not support it. In the settings menu, set "HDMI Audio" to "PCM" or "Normal(Bitstream)". Increase the volume level of the speaker system. In the settings menu, set "HDMI Audio" to "Off". No 5.1-channel audio from the speaker system. Cannot play back a disc. SD Memory Card cannot be read. Cannot play back JPEG files from a disc. Cannot play MP3 files from a disc. Cannot play back Windows Media™ Audio files from a disc. Cannot play back DivX® files from a disc. in the upper right hand corner of the screen. Cannot find a JPEG file. Cannot find an MP3 and Windows Media™ Audio file. Error message appears when I select "Auto" in the "OSD Language". Does the disc contain 5.1-channel audio? The 5.1-channel audio is not available when the disc does not contain it. In the settings menu, set "HDMI Audio" to "Off". Make sure that the product supports the disc. Make sure that the Blu-ray Disc player supports the region code of the DVD or BD. (BD: A: DVD: All or 1) For DVD-RW/-R, make sure that the disc is finalized. Clean the disc. The format of the card does not match that accepted by this unit or the card is not compatible. Make sure that the disc was recorded in the UDF, ISO9660 or JOLIET format. Make sure that the disc was recorded in the UDF, ISO9660 or JOLIET format. Make sure that the bit rate of the MP3 files is between 112 and 320 kbps. Make sure that the sample rate of the MP3 files is 32kHz, 44.1kHz or 48kHz. Make sure that the sample rate of the Windows Media™ Audio files is 44.1 kHz or 48 kHz. Make sure that the file extension is .avi, .AVI, .divx or .DIVX. The operation is not possible. Make sure that the selected group (folder) does not contain more than 9,999 files for DVD, and 999 files for CD. Make sure that the file extension is .jpg, .JPG, .jpeg or .JPEG. Make sure that the selected folder does not contain more than 9,999 files for DVD, and 999 files for CD. Make sure that the file extension is .mp3 or .MP3 for MP3, .wma or .WMA for Windows Media™ Audio. Make sure that the unit is connected to the PHILIPS brand EasyLink TV and the "EasyLink (CEC)" is set to "On". This error message may appear when your TV's OSD language is not supported by this unit. Radio Tuning Function Setup GENERAL Others EN 49