Philips HTS5100B User manual - Page 50
Check the BD-Live Setting., ROM Profile 2.0.
UPC - 609585167964
View all Philips HTS5100B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
TROUBLESHOOTING Problem Cannot connect to the network. Cannot connect to the network while my PC is connected to the network. The capacity of the SD Card decreased. MPEG-2 video and audio on the SD card cannot be played back. The contents of the card cannot be read. No audio from iPod playback. Radio reception is poor. Cannot use the BD-Live function or download of data does not perform properly. Cannot play back BD-video(BDROM Profile 2.0). Tip Check if the LAN cable connection is properly made. Turn on the modem or broadband router. Check the network settings. Check if the broadband router and/or modem is correctly connected. Check the "BD-Live Setting". Check the content of your Internet service contract to see if your Internet Service Provider prevents multiple terminals connecting at the same time. The data may be written to the SD card when a BD-video that supports the virtual package is used and an SD card is in the slot. MPEG-2 is noncompliant on this unit. The card is not compatible or the contents on the card may be damaged. Turn off and then turn the unit on again. Make sure the docking station is connected to this unit. If the signal is too weak, adjust the antenna or connect an external antenna for better reception. Increase the distance between this unit and your TV or VCR. Tune in to the correct frequency. Place the antenna further away from any equipment that may be causing the interference. Incert an SD card with enough space(1GB or more). Check if an SD card is correctly inserted. Insert an SD card(1GB or more) which is formatted on this unit. Some discs with BD-Live function require memory when playing back the content. Do not remove the card during playback. GENERAL 50 EN