Philips LC4745 User Manual - Page 42
Lamp, Lamp replacement, The mains lead must be disconnected from the projector otherwise the lamp door
View all Philips LC4745 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
XP cClear10 English (good) 24-07-2003 15:52 Pagina 42 6. Maintenance > Lamp When operation time reaches the last 100 hours of the average lamplife, the message 'Warning: lamplife has almost expired' will be displayed on the screen, each time the projector is switched on.The lamp indicator lights up orange. AV Mute Stand by Source Lamp Temp Menu OK 6 LASER LLEeFftT Mouse RIGigHhTt VOolume Menu OK AV Mute Standby On Source Mode Select Window The lamplife remaining can be checked using the OSD menu. 1 Press Menu. - The menu bar appears on the screen. 2 Use Cursor Control to move the cursor to 'Settings'. 3 Use Cursor Control to select 'Lamp counter'. - The remaining lamplife hours are displayed in the action window at the bottom of the screen. - When the lamplife has expired, the lamp indicator lights up red and the message 'Warning: lamplife has expired' is displayed on the screen. AV Mute Stand by Source Lamp Temp Lamp replacement Menu OK 6 LASER LLEeFftT Mouse RIGigHhTt VOolume Menu OK AV Mute Standby On Source Mode Select A 1 Switch off the projector and wait until the lamp has cooled down (about 5 minutes) before disconnecting the projector. Remove the mains lead from both projector and wall socket. The mains lead must be disconnected from the projector otherwise the lamp door cannot be removed. 2 Turn the projector over and place it on a soft surface. Never place the projector on the side where the connections are located! 3 Push tab A to the right and remove the lamp door. - When tab A is pressed the mains inlet socket will be partly closed. The lamp door therefore cannot be removed if the mains lead is not disconnected from the projector. 4 Read the caution and warning labels on the lamp holder. 5 Unscrew screw B. B Philips Multimedia Projector 6 Grasp the lamp holder handle and carefully pull the lamp holder out of the projector. • Do not tilt. If the inner tube is broken glass particles may fall out. • Keep lamp holder opening to your right. Do not touch lamp or point lamp holder opening at anyone. 7 Carefully remove the new lamp housing from its package. 42 English User guide cClear