Philips LC5131 User Guide - Page 10

6. Set Up Inserting the batteries in the remote control 1. Press firmly and slide the battery cover off. 2. Insert the two supplied batteries (size AAA1,5V/LR03). Ensure that the polarities (+ and -) of the batteries are aligned correctly. 3. Slide the cover back until it snaps into place. Note: The remote sensors are located on the front and back of the projector. The controllable range is 50 degrees horizontally and 30 degrees vertically relative to a line that is at a right angle to the remote sensor. And the distance between the point of the remote control and remote sensor must be shorter than four meters (13 feet). Caution! Do not mix old and new batteries (also never mix alkaline and manganese batteries). Using the remote control as PC mouse The remote control of this projector can be used as the PC mouse (wireless mouse function) by connecting the Mouse connector of this projector and the PC. The PC Mouse functions of the Remote Control function after pushing the Mouse button on the RC Unit. Remote control mouse functions • The cursor key on the remote control operates the computer mouse functions. • If a computer running Windows is connected, the OK button on the remote control operates as the computer mouse left click button and the Cancel button as the computer mouse right click button. • If a Macintosh computer is connected, the OK and CANCEL buttons operate in the same way as the computer mouse click button. Status Standby/On y Input Auto image OPEN 30˚ 50˚ 50˚ 30˚ , 10