Philips LC5331 User Guide - Page 11
Adjusting the focus and size of the image
UPC - 037849940563
View all Philips LC5331 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
3. Set up > Adjusting the focus and size of the image Zoom ring Focus ring • Use the Zoom ring to adjust the size of the image. • Use the Focus ring to adjust the focus of the image. Adjusting the vertical and horizontal angle of the projector To raise the projector 1 Press the Elevator button (A). 2 Raise the projector to the desired display angle, then release the button to lock the elevator foot (B) into position. 3 Use the horizontal adjuster (C) to fine-tune the display angle. To lower the projector A 1 Press the Elevator button (A). B 2 Lower the projector to the desired display angle, C then release the button to lock the elevator foot (B) into position. 3 Use the horizontal adjuster (C) to fine-tune the display angle. Keystone correction If the projector and screen are not properly placed, the picture will be distorted, producing a keystoned image (picture top width larger than picture bottom width or vice versa). When a keystoned image occurs the 4:3 ratio will still be guaranteed.This is especially important when the projector is being used together with an 'intelligent whiteboard'. 'Keystone correction' allows you to correct picture distortion of the vertical keystone type by internal scaling. • Use Keystone to widen the image. • Use Keystone to narrow the image. These functions are also accessible through the 'Keystone' option in the 'Setup' menu of the On Screen Display (OSD) menu. Moving/transporting the projector Preparation 1 Press the Standby button twice to put the projector in Power/Standby. - The Standby indicator light is red. 2 Wait until the cooling fan has stopped (about 2 minutes after the projector has been put in Standby) and disconnect the mains lead and all other cables. 3 Put the lens cap back in place to prevent damage to the front of the lens when moving/transporting the projector. Never place the projector on the side where the connections are located. Moving/transporting the projector The projector contains many glass and precision parts. If you need to transport the projector, please follow these packing instructions to prevent accidental damage to the projector. • When you are hand-carrying the projector, be sure to use a carrying case like the softbag supplied. • When shipping the projector, use the original packaging material if possible. If you do not have the original packaging, use equivalent materials, placing plenty of cushioning around the projector. • When transporting the projector as freight or checked luggage, first put it in the softbag supplied, then pack it in a firm box, using cushioning around the case. Philips Multimedia Projector 11 English User guide bCool SV1