Philips MCW770 User manual - Page 35
Installation
View all Philips MCW770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
English Installation Warning: Never make or change connections with the power supply switched on. 2 Fit the plug of the loop antenna to AM ANTENNA as shown below. Speaker connections Use the supplied speakers only. Using other speakers can damage the unit or the sound quality will be negatively affected. ● Connect the cable of the left speaker to L (red and black), and the cable of the right speaker to R (red and black) as follows: Press the clip of the red terminal and fully insert the stripped portion of the colored (or marked) speaker cable into the socket, then release the clip. Press the clip of the black terminal and fully insert the stripped portion of the black (or unmarked) speaker cable into the socket, then release the clip. Antenna connections AM antenna The supplied loop antenna is for indoor use only. 1 Assemble the loop antenna as shown below. AM ANTENNA FM ANTENNA 3 Adjust the position of the antenna for best reception (as far away as possible from the TV,VCR or other radiation sources). FM antenna The supplied wire antenna can only be used to receive nearby stations. For better reception we recommend using a cable antenna system or an outdoor antenna. 1 Open the FM ANTENNA click-fits by pushing the lever down as shown below. NTENNA FM ANTENNA AM ANTENNA FM ANTENNA 2 Insert each wire of the antenna into one hole. 3 Close the click-fits using the lever. 4 Move the antenna in different positions for optimal reception (as far away as possible from the TV,VCR or other radiation sources). 16