Philips MZ3 User manual - Page 13

English Different play modes: SHUFFLE and REPEAT You can select and change the various play modes before or during playback. The play modes can also be combined with PROGRAM. SHUFFLE tracks of the entire CD/ program are played in random order SHUFFLE and REPEAT ALL to repeat the entire CD/ program continuously in random order REPEAT ALL repeats the entire CD/ program continuously REPEAT repeats the current track continuously 1 To select your play mode before or during playback, press either: • on the remote control SHUFFLE or REPEAT; • on the set CLOCK repeatedly until the display shows the desired function. 2 Press 2; to start playback if in the STOP position. ™ If you have selected SHUFFLE, playback starts automatically. IOIO IOIIII IOII IOII IIOOIIIOI II MC 158 COMPACT AUDIO SYSTEM CD DBB SHUFFLE PROGRAM OPEN CLOSE PRESET TUNING Programming track numbers Program in the STOP position to select and store your CD tracks in the desired sequence. If you like, store any track more than once. Up to 40 tracks can be stored in the memory. 1 Press PROGRAM on the set or remote control to enter the programming mode. ™ A track number is shown and PROGRAM flashes. 2 Use the ¡1 or 2™ on the set, (on the remote control ¡ or ™) to select your desired track number. 5 To start playback of your CD program, press 2; . Reviewing the program • In STOP mode, press and hold down PROGRAM on the set or remote control, until the display shows all your stored track numbers in sequence. Erasing a program You can erase the program by: - pressing 9 once in the STOP position; - pressing 9 twice during playback; - opening the CD tray. • CLEARED is shown briefly and PROGRAM disappears from the display. 3 To return to normal playback, press the respective SHUFFLE or REPEAT button until the various SHUFFLE/ REPEAT modes are no longer displayed. - You can also press 9 to cancel your play mode. 3 Press PROGRAM to confirm the track to be stored. ™ The number of tracks programmed and total playing time of the program is shown briefly, then the selected track and PROG is shown if total playing time is 100 minutes or more. 4 Repeat steps 2-3 to select and store all desired tracks. ™ FULL is displayed if you attempt to program more than 40 tracks. 13