Philips SCD520 User manual - Page 19
Adjusting microphone sensitivity, Sound alert on/off, Setting room temperature range
![]() |
UPC - 075020005465
View all Philips SCD520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
ENGLISH 19 Adjusting microphone sensitivity You can set the microphone sensitivity of the baby unit to the desired level.You can only change the microphone sensitivity when a connection between the baby unit and the parent unit has been established, i.e. when the LINK light on the parent unit lights up green continuously. 1 Select 'Sensitivity' with the + and - buttons. 2 Press the OK button to confirm. 3 Select the desired microphone sensitivity level for the baby unit with the + and - buttons. , k = minimum sensitivity level , l = maximum sensitivity level 4 Press the OK button to confirm. , The message 'Saved' appears on the display. Note:When the microphone sensitivity of the baby unit is set to a high level, it picks up more sounds and therefore transmits more often. As a result, the units consume more power. Sound alert on/off This feature allows you to monitor your baby silently. It enables you to switch off the volume on your parent unit and still be alerted if your baby cries. If the sound alert is switched on, the parent unit beeps as soon as the fourth sound level light lights up blue while the volume is switched off. In addition, the backlight of the parent unit display goes on and the sound alert symbol ( R) flashes on the display. 1 Select 'Sound Alert' with the + and - buttons. 2 Press the OK button to confirm. 3 If the alert is off, the display shows 'On?'. Press the OK button to switch on the alert. If the alert is on, the display shows 'Off?'. Press the OK button to switch off the alert. , If you have set the sound alert to 'on', the sound alert symbol ( R) appears on the display of the parent unit. Setting room temperature range A baby will sleep comfortably in a room heated to a temperature between 61°F and 68°F.This is important, since a baby cannot regulate its body temperature as well as an adult. A baby needs more time to adjust to temperature changes. If you do not set a temperature range, the baby monitor alerts you when the temperature in your baby's room drops below 57°F or rises above 86°F. In this case, the backlight of the parent unit display goes on and 'High' or 'Low' appears on the display.To change the default minimum and maximum temperature, follow the instructions below. Note:The temperature of the baby's room is shown on the display of the parent unit when they are linked. 1 Select 'Temperature' with the + and - buttons. 2 Press the OK button to confirm.
![](/manual_guide/products/phillips-scd520-user-manual-fac51fe/19.png)