Philips SRP2004WM User manual - Page 13
Operation, Batteries
View all Philips SRP2004WM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
English Service and support How do I set the remote control for combo devices (TV / VCR,TV / DVD, DVD / VCR, etc)? Some combo devices require you to set up two different source selection keys to control both parts of the combo device. For example, if you have a TV / DVD combo, you might need to set up the remote control for both TV and DVD to operate your TV / DVD combo. Operation The remote control does not wake up anymore. Battery level too low or battery lifetime came to an end. • Replace the batteries. See chapter 2.1. The device I want to operate does not respond at all / does not respond to all of the key commands. • Check if the keys you press are available on the original remote control of the device. • Try improving keys. See chapter 2.3.2. Wrong code selected during setup. • Set up the remote control again for the device. Always test if the device responds, before leaving setup mode. See chapter 2.2. It may be that the keys that you are trying to use have a different naming on the original remote control. • Try out all keys to find the one(s) you need. Batteries Will my settings be deleted when I replace the batteries? No. All user settings will be retained in the remote control memory in the remote control memory for 5 minutes. WM_17__Manual_80_210.indd 13 EN 13 25-09-0