Philips SRP2004WM User manual - Page 8

The red Setup

Get Philips SRP2004WM PDF manuals and user guides View all Philips SRP2004WM manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

2.3.2 Improving keys When correctly set up, the remote control should be able to operate all your devices. However, when using the remote control for the first time it might occur that some keys do not yet function as expected. In this case you can have the remote control search for alternatives. Note Improving keys is not possible when the code was found during full database search (with code '9, 9, 9, 9'). During initial setup 1 Make sure the receiving device is able to respond. E.g. when you try to repair the Play key for your DVD player, make sure to insert a DVD into the DVD player otherwise the Play key is not able to function. 2 Press the key that does not function, keep it pressed and immediately release it when the device responds. Repeat this for every key that does not function. • If the key still does not function as expected, try pressing it again for a longer period of time. After initial setup 1 Make sure the receiving device is able to respond. E.g. when you try to repair the Play key for your DVD player, make sure to insert a DVD into the DVD player otherwise the Play key is not able to function. 2 Select the device that you wish to operate (e.g. DVD). Press the device selection key to select DVD. 3 Keep keys and 5 sec. pressed simultaneously for  5 seconds. • The red Setup light lights up.The remote control is now in setup mode. 8 EN WM_17__Manual_80_210.indd 8 25-09-0

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
8
EN
2.3.2
Improving keys
When correctly set up, the remote control
should be able to operate all your devices.
However, when using the remote control for the
first time it might occur that some keys do not
yet function as expected.
In this case you can have the remote control
search for alternatives.
Note
Improving keys is not possible when the code
was found during full database search (with
code ‘9, 9, 9, 9’).
During initial setup
1
Make sure the receiving device is able to
respond. E.g. when you try to repair the Play
key for your DVD player, make sure to insert
a DVD into the DVD player otherwise the
Play key is not able to function.
2
Press the key that does not function, keep it
pressed and
immediately
release it when the
device responds. Repeat this for every key
that does not function.
•
If the key still does not function as expected,
try pressing it again for a longer period of
time.
After initial setup
1
Make sure the receiving device is able to
respond. E.g. when you try to repair the Play
key for your DVD player, make sure to insert
a DVD into the DVD player otherwise the
Play key is not able to function.
2
Select the device
that you wish to
operate (e.g. DVD).
Press the
device
selection key to
select DVD.
3
Keep keys
and
pressed
simultaneously for
5 seconds
.
•
The red Setup
light
lights
up.The remote control is now in setup
mode.
5 sec.
WM_17__Manual_80_210.indd
8
25-09-0