Pioneer 7000 Owner's Manual - Page 33

English START PLAYBACK (Using normal connections)  Changing the playlist's track order 1 Select the track you wish to move from the playlist. 2 Press the rotary selector dial. • A menu will appear in the right window. 3 Turn the rotary selector dial to select [MOVE TRACK], then press the rotary selector dial. • A yellow line will be displayed. 4 Turn the rotary selector dial to the place you wish to move the track. 5 Press the rotary selector dial. • The track selected in step 1 will be moved to before the track selected in step 4, and the display will return to the playlist.  To delete tracks from a playlist 1 Select the track you wish to delete from the playlist. 2 Press the rotary selector dial. • A menu will appear in the right window. 3 Turn the rotary selector dial to select [DELETE TRACK], then press the rotary selector dial. • The track will be deleted from the playlist. • A track cannot be deleted when it is set in the controller.  To close a playlist 1 When a playlist is open, press the select up () button.  To delete a playlist All tracks recorded in the playlist will be deleted from the playlist. 1 Select the name of the playlist. 2 Hold the rotary selector dial depressed for one second or more. The [CANCEL], [RENAME], [ALL TRACK CLEAR] menu will appear. 3 Turn the rotary selector dial and select [ALL TRACK CLEAR]. 4 Press the rotary selector dial. All tracks recorded in the playlist will be deleted from the playlist (the playlist will be empty). • A track set in the controller cannot be deleted from the playlist.  Saving a playlist Whenever tracks are recorded, erased, or edited in a playlist, the new playlist is automatically saved (saving occurs about five seconds after an editing operation is performed, assuming no further command input). NOTE • If the unit's power is turned off immediate (within five seconds) after editing a playlist, the results of the edit may not be reflected properly.  Editing the name of a playlist 1 Select the desired playlist 2 Hold the rotary selector dial depressed for one second or more. • A menu will appear on the right side of the center display. 3 Use the rotary selector dial to select [RENAME], then press the rotary selector dial. 4 Enters edit mode. Use the rotary selector dial to edit the name of the playlist. • A maximum of 32 characters can be input. Select up () button: Delete previous character to cursor. Select down () button: Move cursor to next character. Press rotary selector dial: Save edited contents and leave editing mode. Rotate rotary selector dial: Select character type: Upper case  lower case  numerals  symbols 5 When editing is completed, press the rotary selector dial. • The playlist will flash, indicating that editing is completed. MEMO • Two-byte characters are not supported. • For information on using a keyboard for editing, see the section "TRACK SELECTION WITH A USB KEYBOARD" (P. 30). 33 En