Pioneer 7000 Owner's Manual - Page 57

English USING DJ SOFTWARE At the same time, the display A/B displays "PC". 6 Use the controller to operate the DJ software. Use the various buttons, jog dial, and TEMPO adjust slider to operate the DJ software.  Setting a MIDI channel MIDI channel setting can be performed from the UTILITY screen. 1 Press the UTILITY button. 2 Press the [PC] function button. The center display will show the MIDI channel setting menu. • Controller A uses the same channel as the center display, while controller B uses a different channel. (Factory defaults are for Controller A and center display to be set to Channel 1, and Controller B set to Channel 2). MEMO • By designating the MEP-7000 as an audio output device in the DJ software, tracks played with the DJ program can be output from the drive unit. 7 To switch to playback of disc or tracks on USB storage device While controller A (or B) is controlling the computer, if a track on disc or USB storage device is selected on the BROWSE screen and the LOAD A (or LOAD B) button is pressed, playback and control will switch to the selected track on disc or USB storage device.  Control using "Manipulator Style" 1 Connect to the computer. The center display will show the [PRO DJ] logo. 3 Either press the rotary selector dial, or press the select down () button. The icon will move to the right. 4 Turn the rotary selector dial to change the value. Values between 1 and 16 can be set. 5 Press the rotary selector dial to confirm the value selected. • Press the select up () button to cancel the selection and return to the UTILITY screen. 2 Start the DJ software program. When communication is established with the DJ program, the MEP-7000 operates as a MIDI controller, and the status of controller A/B and center display section's buttons and controls are output as MIDI messages. MEMO • While the UTILITY screen is being displayed on the center display, the center display's MIDI messages are not output. 57 En