Pioneer AVH-220EX Owners Manual - Page 41

English Audio settings The menu items vary according to the source. Some of the menu items become unavailable when the volume is muted. Menu Item [Graphic EQ] [S.Bass] [Powerful] [Natural] [Vocal] [Flat] [Custom1] [Custom2] [Fader/Balance] Description Select or customize the equalizer curve. Select a curve that you want to use as the basis of customizing then touch the frequency that you want to adjust. TIPS • If you make adjustments when a curve [S.Bass], [Powerful], [Natural], [Vocal], or [Flat] is selected, the equalizer curve settings will be changed to [Custom1] mandatorily. • If you make adjustments when the [Custom2] curve is selected for example, the [Custom2] curve will be updated. • [Custom1] and [Custom2] curves can be created common to all sources. Touch or to adjust the front/rear speaker balance. Set [Front] and [Rear] to [0] when using a dual speaker system. Touch or to adjust the left/right speaker balance. TIP You can also set the value by dragging the point on the displayed table. [Source Level Adjuster] [-4] to [+4] NOTE Only the fader can be adjusted when [Rear] is selected as the speaker mode. Adjust the volume level of each source to prevent radical changes in volume when switching between sources other than FM. Touch or to adjust the source volume after comparing the FM tuner volume level with the level of the source. TIP If you directly touch the area where the cursor can be moved, the SLA (source level adjustment) setting will be changed to the value of the touched point. [Subwoofer] [On] [Off] NOTES • Settings are based on the FM tuner volume level, which remains unchanged. • This function is not available when the FM tuner is selected as the AV source. Select enable or disable subwoofer output from this product. - 41 -