Pioneer AVH-P6400CD Operation Manual - Page 11

Before You Start Section 01 English Important • Do not drive with the operation panel removed and the monitor up as the angle of the display may change resulting in scratching or damage. • Be careful of the magnetic part of this product. Do not place magnetic products such as credit cards, cassette tapes and watches near it. Doing so may result in damage to those products or the loss of information recorded on them. Resetting the Microprocessor When the ignition switch is turned OFF, pressing RESET lets you reset the microprocessor to its initial settings without changing SET UP MENU settings, Condition Memory and other settings. Press RESET in the following cases. • When this unit fails to operate correctly. • When strange (incorrect) messages appear on the display. Español Deutsch Français Italiano Attaching the operation panel Replace the operation panel by holding it upright to this unit and clipping it securely into the mounting hooks. Do not use this product when it is just hanging on hooks. 1 Turn the ignition switch OFF. 2 Press RESET. Use a pen tip or other pointed instrument. Notes • When using with a Pioneer Navigation System, if you press RESET, be sure the ACC OFF is selected. If ACC ON is selected, correct operation may not be possible even if you press RESET. • After completing connections or when you want to erase all memorized settings or return the unit to its initial (factory) settings, switch your engine ON or set the ignition switch to ACC ON before pressing RESET. En 11 Nederlands