Pioneer AVH-P6400CD Operation Manual - Page 61
Other Functions
View all Pioneer AVH-P6400CD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Other Functions Section 13 English Español Deutsch Setting remote control code type When the remote control operation switch is set to DVD, changing the remote control code type enable to operate the Pioneer DVD player by the supplied remote control. There are two remote codes, code type A and code type B. When using this unit with an "XDV-P9" MultiDVD Player, select code A. When using this unit with "SDV-P7" DVD player, select code A or B (depending on reception signal setting of DVD player). Set the remote control selection switch on the left side of the remote control to appropriate position with a pen tip or other pointed instrument . • If you selected B mode, read the following procedure and change the code type into the appropriate one. Using different entertainment audio displays You can enjoy displays while listening to each sound source. The display for this MENU is the same regardless of which source you operate from. Press NAVI/AV on the head unit. Each time you press NAVI/AV on the head unit the display changes in the following order: MOVIE SCREEN-PICTURE 1-PICTURE 2 Using the AUX source An IP-BUS-RCA Interconnector such as the CD-RB20 or CD-RB10 (sold separately) lets you connect this unit to auxiliary equipment featuring RCA output. For more details, refer to the IP-BUS-RCA Interconnector owner's manual. Selecting AUX as the source Press SOURCE to select AUX as the source. Press SOURCE until AUX appears in the display. • If the auxiliary setting is not switched on, AUX cannot be selected. For more details, see Switching the auxiliary setting on page 59. Setting the AUX title The title displayed for the AUX source can be changed. 1 After you have selected AUX as the source, press A.MENU and the AUX SOURCE MENU is displayed. 2 Press 5 or ∞ to select AUX, and press A.MENU. AUX MENU is displayed. 3 Press 5 or ∞ to select NAME EDIT, and press A.MENU. NAME EDIT adjustment indications are displayed. 4 Press A.MENU to select the desired character type. Press A.MENU repeatedly to switch between the following character type: Alphabet (Upper case), Numbers and Symbols- Alphabet (Lower case) Français Italiano Nederlands En 61