Pioneer BDP-150 User Guide - Page 47

Problem Secondary audio or interactive audio is not output. Check Remedy 08 Is HDMI Audio Out properly When listening to the sound from an HDMI OUT terminal, set HDMI set? Audio Out to PCM (page 35). Are Digital Output properly When listening to the sound from an DIGITAL OUT terminal, set set? Digital Output to Re-encode or PCM (page 34). After a disc is inserted, Are there too many files Loading stays displayed and recorded on the disc? playback does not start. When a disc on which files are recorded is inserted, depending on the number of files recorded on the disc, loading may take several dozen minutes.  is displayed in file names, etc. The characters that cannot be displayed on this player are displayed in . A message indicating low memory appears while playing a BD-ROM disc. • Connect a USB device (page 17). • Erase the data stored on the connected USB device from BUDA Setup (page 38). Control function Problem Control function does not work. Check Remedy Is the HDMI cable properly To use the Control function, connect the Flat Screen TV and AV system connected? (AV receiver or amplifier, etc.) to the HDMI OUT terminal (page 14). Is the HDMI cable you are Use a High Speed HDMI®/TM Cable. The Control function may not work using a High Speed HDMI®/ properly if an HDMI cable other than a High Speed HDMI®/TM Cable is TM Cable? used. Is this player connected to If video signals are being output from a terminal other than the HDMI the TV using an HDMI cable OUT terminal, the Control function does not work. Connect to the TV to watch the picture? using an HDMI cable (page 14). Is Control set to On on the Set Control to On on the player (page 35). player? Does the connected device • The Control function will not work with devices of other brands that support the Control function? do not support the Control function, even when connected using an HDMI cable. • The Control function will not work if devices that do not support the Control function are connected between the Control-compatible device and the player. • See page 14. • Even when connected to a Pioneer product compatible with the Control function, some of the functions may not work. Also refer to the operating instructions for the connected device. Is Control set to On on the connected device? Set Control to On on the connected device. The Control function operates when Control is set to On for all devices connected to the HDMI OUT terminal. Once connections and settings of all the devices are finished, be sure to check that the player's picture is output to the Flat Screen TV. (Also, check after changing the connected devices and connecting and/or disconnecting HDMI cables.) If the player's picture is not being output to the Flat Screen TV, the Control function may not work properly. For details, refer to the operating instructions of the connected device. Are multiple players connected? The Control function may not work if three or more players, including this player, are connected by an HDMI cable. Network Problem Check • BD-LIVE function (connection to the Internet) cannot be used. • "No valid id file found!" is displayed when I try to update the software. Remedy Perform Connection Test (page 38). If "Networks is OK." is displayed, check the proxy server settings (page 38). Also, there may be a problem with the Internet connection. Contact your Internet service provider. 47 En