Pioneer CNDV-50MTP Operation Manual - Page 50
Exces, sive vibration, Parking brake, Power Voltage, Illumination, Back Signal
View all Pioneer CNDV-50MTP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Editing the Navigation Utilities Chapter 3 will be displayed. When the angle of the navigation unit has been changed, "Excessive vibration" will be displayed. 4. Parking brake When the parking brake is applied, "On" is displayed. When the parking brake is released, "Off" is displayed. 5. Power Voltage The power supply (reference value) provided from the vehicle battery to the navigation system is shown. If the voltage does not fall within the range of 11 to 15V, check that power cable connection is correct. 6. Illumination When the headlights or small lamps of a vehicle are on, "On" is displayed. (If the orange/white lead is not connected, "Off" appears.) 7. Back Signal When the gear lever is shifted to "R", the signal switches to "High" or "Low". (Which of these is displayed depends on the vehicle.) 48