Pioneer CT-W404R Operating Instructions - Page 6

CONNECTIONS • This illustration shows CT-W504R. Compact Disc Player Remotel::n_r_[ _i_ CD • DECK SYNCHRO jack Recording connection CD • DECK SYNCHRO control cord (CT-W504R only) cord _ _ _PloorandYbeact ,kon I .Ec _*llJ/, I° ° ° O'1 v v Stereo Amplifier TAPE REC/PLAY jacks NOTES: • CONTROL OUT ack • • • Read through the operating instructions of the stereo components which you intend to connect to this unit. Turn the power on only after making all of the connections. Make sure that all of the connection plugs are inserted securely, as improper connections may generate noise. Keep the input and output jacks connected between the amplifier and this unit, otherwise, the CD • DECK SYNCHRO recording cannot be carried out. Even when the CD player is connected to the amplifier with an optical fiber cable, connect the CD player to the ampfifier or this unit with the input and output cords that have pin plugs. • I CONNECTING PLAYBACK CORDS THE RECORDING AND 1 I PIONEER SYSTEM REMOTE CONTROL I Left channel _..._e plug CONTROL IN jack (CT-WSO4R/CT-W404R/CT-W204: Australian models only) Use the enclosed Remote Control Cord to connect this jack to the CONTROL OUT jack of another component which bears the [] mark (indicating that it is equipped with PIONEER System Remote Control). You will then be able to operate this unit using the Pioneer system remote control unit. If the remote control unit does not have separate buttons for deck I and deck II, or a selection button to choose deck I or deck II, the buttons will only operate deck II. To operate deck I with a remote control unit which was not designed for double deck cassette players, see page 8. Right channel_ "" c_2_ Red plug Connect the TAPE jacks of your amplifier to the LINE jacks of the cassette deck. Be sure to connect the REC (INPUT) jacks of the deck to the recording (output) jacks of the amplifier, and the PLAY (OUTPUT) jacks of the deck to the play (input) jacks of the amplifier. • Connect the plugs properly: Left channel -- White plug Right channel -- Red plug CONTROL OUT jack Intermediary jack which outputs signals from the CONTROL IN jack of this unit to the input jack of another unit. Connect this jack to the CONTROL IN jack of another component compatible with Pioneer System Remote Control. NOTE: Be sure to connect both of the control cord's plugs securely to the CONTROL IN and CONTROL OUT jacks. Do not connect only one end of the cable. I • D • DECK SYNCHRO RECORDING (CT-WSO4R only) CD • DECK SYNCHRO recording can be carried out when this unit is connected to a Pioneer CD player equipped with a CD DECK SYNCHRO jack. Connection Connect the CD • DECK SYNCHRO jack of this unit to the CD • DECK SYNCHRO jack of the CD player using the supplied CD • DECK SYNCHRO control cord. CONNECTING THE POWER CORD I Insert the power cord of the cassette deck into the accessory AC outlet of your amplifier, or into a normal household outlet. 6 En