Pioneer DEH-7300BT Owner's Manual - Page 16

Appendix Additional Information Additional Information Message CHECK USB Cause Action The USB connector or USB cable has shortcircuited. Check that the USB connector or USB cable is not caught in something or damaged. The connected Disconnect the USB storage de- USB storage de- vice consumes vice and do not more than 500 use it. Turn the mA (maximum ignition switch to allowable cur- OFF, then to ACC rent). or ON and then connect only compliant USB storage devices. The iPod operates correctly but does not charge Make sure the connection cable for the iPod has not shorted out (e.g., not caught in metal objects). After checking, turn the ignition switch OFF and back ON, or disconnect the iPod and reconnect. Message ERROR-19 ERROR-23 Cause Action Communication ! Perform one of failed. the following op- erations. -Turn the ignition switch OFF and back ON. -Disconnect the USB storage de- vice. -Change to a dif- ferent source. Then, return to the USB source. ! Disconnect the cable from the iPod. Once the iPod's main menu is displayed, re- connect the iPod and reset it. iPod failure Disconnect the cable from the iPod. Once the iPod's main menu is displayed, reconnect the iPod and reset it. USB storage de- USB storage de- vice was not for- vice should be for- matted with matted with FAT12, FAT16 or FAT12, FAT16 or FAT32 FAT32. 16 En Message Cause Action ERROR-16 The iPod firmware version is old iPod failure STOP There are no songs in the current list. NOT FOUND No related songs Update the iPod version. Disconnect the cable from the iPod. Once the iPod's main menu is displayed, reconnect the iPod and reset it. Select a list that contains songs. Transfer songs to the iPod. Handling guidelines Discs and player Use only discs that feature either of the following two logos. Use 12-cm discs. Do not use 8-cm discs or an adapter for 8-cm discs. Use only conventional, fully circular discs. Do not use shaped discs. Bluetooth Telephone Message Cause Action ERROR-10 The power failed Turn the ignition for the Blue- switch OFF and tooth module of then to ACC or this unit. ON. If the error mes- sage is still dis- played after performing the above action, please contact your dealer or an authorized Pioneer Service Station. Do not insert anything other than a CD into the CD loading slot. Do not use cracked, chipped, warped, or otherwise damaged discs as they may damage the player. Unfinalized CD-R/CD-RW discs cannot be played back. Do not touch the recorded surface of the discs. Store discs in their cases when not in use. Do not attach labels, write on or apply chemicals to the surface of the discs. To clean a CD, wipe the disc with a soft cloth outward from the center. Condensation may temporarily impair the player's performance. Let it rest for about one hour to adjust to a warmer temperature. Also, wipe any damp discs off with a soft cloth.