Pioneer DEH-7300BT Owner's Manual - Page 8

Section 02 Operating this unit Operating this unit 3 Turn M.C. to select the function. After selecting, perform the following procedures to set the function. REPEAT (repeat play) 1 Press M.C. to display the setting mode. 2 Turn M.C. to select a repeat play range. For details, refer to Selecting a repeat play range on the previous page. 3 Press M.C. to confirm the selection. SHUFFLE (shuffle) 1 Press M.C. to display the setting mode. 2 Turn M.C. to select your favorite setting. ! SONGS - Play back songs in the selected list in random order. ! ALBUMS - Play back songs from a randomly selected album in order. ! OFF - Cancel random play. 3 Press M.C. to confirm the selection. SHUFFLE ALL (shuffle all) 1 Press M.C. to turn shuffle all on. To turn off, set SHUFFLE in the FUNCTION menu to off. LINK PLAY (link play) 1 Press M.C. to display the setting mode. 2 Turn M.C. to change the mode; press to select. For details about the settings, refer to Playing songs related to the currently playing song on the previous page. PAUSE (pause) 1 Press M.C. to pause or resume. AUDIO BOOK (audiobook speed) 1 Press M.C. to display the setting mode. 2 Turn M.C. to select your favorite setting. ! FASTER - Playback at a speed faster than normal ! NORMAL - Playback at normal speed ! SLOWER - Playback at a speed slower than normal 3 Press M.C. to confirm the selection. S.RTRV (sound retriever) Automatically enhances compressed audio and restores rich sound. 1 Press M.C. to display the setting mode. 2 Turn M.C. to select the desired setting. For details, refer to Enhancing compressed audio and restoring rich sound (sound retriever) on the previous page. 3 Press M.C. to confirm the selection. Notes ! Switching the control mode to CTRL iPod pauses song playback. Operate the iPod to resume playback. ! The following functions are still accessible from the unit even if the control mode is set to CTRL iPod/CTRL APP. - Pausing - Fast forward/reverse - Track up/down - Repeat play (ONE/ALL/OFF) - Random play (shuffle) - (list) to use iPod menu - a to turn the iPod click wheel to the left - b to turn the iPod click wheel to the right ! When the control mode is set to CTRL iPod, operations are limited as follows: - The function settings are not available. - The browse function cannot be operated from this unit. 8 En Bluetooth Telephone Connection menu operation Important Be sure to park your vehicle in a safe place and apply the parking brake when performing this operation. 1 Press and hold to display the connection menu. # You cannot operate this step during a call. 2 Turn M.C. to select the function. After selecting, perform the following procedures to set the function. DEVICELIST (connecting or disconnecting a cellular phone from the device list) 1 Press M.C. to display the setting mode. 2 Turn M.C. to select the name of a device you want to connect/disconnect. ! Press and hold M.C. to switch the BD ad- dress and device name. 3 Press M.C. to connect/disconnect the selected cellular phone. If the connection is established, * is indicated on the device name. DEL DEVICE (deleting a cellular phone from the device list) 1 Press M.C. to display the setting mode. 2 Turn M.C. to select the name of a device you want to delete. ! Press and hold M.C. to switch the BD ad- dress and device name. 3 Press M.C. to display DELETE YES. 4 Press M.C. to delete a cellular phone informa- tion from the device list. ! While this function is in use, do not turn off the engine. ADD DEVICE (connecting a new cellular phone) 1 Press M.C. to start searching. ! To cancel, press M.C. while searching. 2 Turn M.C. to select a device from the device list. ! If the desired device is not displayed, select RE-SEARCH. 3 Press and hold M.C. to switch the BD address and device name. 4 Press M.C. to connect the selected cellular phone. ! To complete the connection, check the device name (DEH-7300BT) and enter the link code on your cellular phone. ! PIN code is set to 0000 as the default. You can change this code. Refer to PIN CODE (PIN code input) on this page. ! If five devices are already paired, DEVICEFULL is displayed and it is not possible to perform this operation. In this case, delete a paired device first. SPCL. DEV. (setting a special device) Bluetooth devices that are difficult to establish a connection with are called special devices. If your Bluetooth device is listed as a special device, select the appropriate one. 1 Press M.C. to display the setting mode. 2 Use M.C. to select a special device. Turn to change the menu option. Press to select. ! If five devices are already paired, DEVICE- FULL is displayed and it is not possible to perform this operation. In this case, delete a paired device first. 3 Turn M.C. to display this unit's device name, BD address and pincode. 4 Use a cellular phone to connect to this unit. ! To complete the connection, check the device name (DEH-7300BT) and enter the link code on your cellular phone. ! PIN code is set to 0000 as the default. You can change this code. Refer to PIN CODE (PIN code input) on this page.