Pioneer DEH-7300BT Owner's Manual - Page 6

Section 02 Operating this unit Operating this unit Note Depending on the area, you cannot switch the display. Function settings 1 Press M.C. to display the main menu. 2 Turn M.C. to change the menu option and press to select FUNCTION. 3 Turn M.C. to select the function. After selecting, perform the following procedures to set the function. BSM (best stations memory) BSM (best stations memory) automatically stores the six strongest stations in the order of their signal strength. 1 Press M.C. to turn BSM on. To cancel, press M.C. again. LOCAL (local seek tuning) Local seek tuning lets you tune in to only those radio stations with sufficiently strong signals for good reception. 1 Press M.C. to display the setting mode. 2 Turn M.C. to select the desired setting. FM: OFF-LEVEL 1-LEVEL 2-LEVEL 3- LEVEL 4 AM: OFF-LEVEL 1-LEVEL 2 The highest level setting allows reception of only the strongest stations, while lower levels allow the reception of weaker stations. 3 Press M.C. to confirm the selection. CD/CD-R/CD-RW and USB storage devices Basic Operations Playing a CD/CD-R/CD-RW 1 Insert the disc into the disc loading slot with the label side up. Ejecting a CD/CD-R/CD-RW 1 Press h. Playing songs on a USB storage device 1 Open the USB connector cover and plug in the USB storage device using a USB cable. Stopping playback of files on a USB storage device 1 You may disconnect the USB storage device at any time. Selecting a folder 1 Press a or b. Selecting a track 1 Press c or d. Fast forwarding or reversing 1 Press and hold c or d. ! When playing compressed audio, there is no sound during fast forward or reverse. Returning to root folder 1 Press and hold B (BAND/ESC). Switching between compressed audio and CD-DA 1 Press B (BAND/ESC). Note Disconnect USB storage devices from the unit when not in use. Displaying text information Selecting the desired text information 1 Press . Scrolling the text information to the left 1 Press and hold . Notes ! Depending on the version of iTunes used to write MP3 files to a disc or media file types, incompatible text stored within an audio file may be displayed incorrectly. ! Text information items that can be changed depend on the media. Selecting and playing files/ tracks from the name list 1 Press to switch to the file/track name list mode. 2 Use M.C. to select the desired file name (or folder name). Changing the file or folder name 1 Turn M.C. Playing 1 When a file or track is selected, press M.C. Viewing a list of the files (or folders) in the selected folder 1 When a folder is selected, press M.C. Playing a song in the selected folder 1 When a folder is selected, press and hold M.C. Advanced operations using special buttons Selecting a repeat play range 1 Press 6/ to cycle between the following: CD/CD-R/CD-RW ! DISC - Repeat all tracks ! TRACK - Repeat the current track ! FOLDER - Repeat the current folder USB audio player/USB memory ! ALL - Repeat all files ! TRACK - Repeat the current file ! FOLDER - Repeat the current folder Playing tracks in random order 1 Press 5/ to turn random play on or off. Tracks in a selected repeat range are played in random order. Pausing playback 1 Press 2/PAUSE to pause or resume. Enhancing compressed audio and restoring rich sound (sound retriever) 1 Press 1/S.Rtrv to cycle between: OFF (off)-1-2 1 is effective for low compression rates, and 2 is effective for high compression rates. Function settings 1 Press M.C. to display the main menu. 2 Turn M.C. to change the menu option and press to select FUNCTION. 3 Turn M.C. to select the function. After selecting, perform the following procedures to set the function. 6 En