Pioneer DEH-P5200 Owner's Manual - Page 34
Subwoofer Setting Adjustment 80HZ 0, Non Fading Output NON FAD
View all Pioneer DEH-P5200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Audio Adjustment Subwoofer Setting Adjustment (80HZ 0) When the Subwoofer output is ON, you can adjust the cut-off frequency and the output level of Subwoofer. 1. Press the AUDIO button and select the Subwoofer setting mode (80HZ 0) in the Audio Menu. 2. Select the frequency to 50 Hz, 80 Hz or 125 Hz with the 2/3 buttons. 3. Increase or decrease the output level with the 5/∞ buttons. The display shows "+ 6" - "- 6". Note: • You can select the Subwoofer setting mode only when Subwoofer output is switched ON in the Subwoofer ON/OFF mode. Non Fading Output (NON FAD) When the Non Fading Output setting is ON, the audio signal does not pass through this unit's low pass filter (for the Subwoofer), but is output through the RCA output. Note: • When the Subwoofer Controller setting is only "S/W CTL:EXT", you can switch the Non Fading Output ON/OFF mode. (Refer to page 40.) 1. Press the AUDIO button and select the Non Fading Output ON/OFF mode (NON FAD) in the Audio Menu. 2. Switch the Non Fading output ON/OFF with the 5/∞ buttons. 33