Pioneer DEH-P7800MP Owner's Manual - Page 61
Using BBE sound, Audio Adjustments, Adjusting 16-band graphic, equalizer
UPC - 012562793917
View all Pioneer DEH-P7800MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Audio Adjustments Section 13 English Powerful-Natural-Vocal-Flat-Custom1 -Custom2-Super Bass 3 Push MULTI-CONTROL up or down to adjust the equalizer curve. Each time MULTI-CONTROL is pushed up or down, the equalizer curve increases or decreases respectively. +6 to -6 is displayed as the equalizer curve is increased or decreased. # The actual range of the adjustments are different depending on which equalizer curve is selected. # The equalizer curve with all frequencies set to 0 cannot be adjusted. Adjusting 16-band graphic equalizer For Custom1 and Custom2 equalizer curves, you can adjust the level of each band. ! A separate Custom1 curve can be created for each source. (The built-in CD player and the multi-CD player are set to the same equalizer adjustment setting automatically.) If you make adjustments when a curve other than Custom2 is selected, the equalizer curve settings will be memorized in Custom1. ! A Custom2 curve can be created common to all sources. If you make adjustments when the Custom2 curve is selected, the Custom2 curve will be updated. 1 Recall the equalizer curve you want to adjust. See Recalling equalizer curves on the previous page. 2 Use MULTI-CONTROL to select 16-band graphic equalizer adjustment. FREQ. appears in the display. 3 Push MULTI-CONTROL left or right to select the equalizer band to adjust. Each time MULTI-CONTROL is pushed left or right, equalizer bands are selected in the following order: 20-31.5-50-80-125-200-315-500- 800-1.25k-2k-3.15k-5k-8k-12.5k- 20k (Hz) 4 Push MULTI-CONTROL up or down to adjust the level of the equalizer band. Each time MULTI-CONTROL is pushed up or down, the level of the equalization band increases or decreases. +6 to -6 is displayed as the level is increased or decreased. # You can then select another band and adjust the level. 5 Press BAND to cancel the 16-band graphic equalizer adjustment. Using BBE sound With BBE, playback very close to the original sound can be obtained by correction with a combination of phase compensation and high-range boost for the delay of the high-frequency components and the amplitude deviation occurring during playback. This function makes it possible to reproduce the dynamic sound field as if you are listening to a live performance. With BBE sound processing technology, you can adjust the level of BBE. 1 Use MULTI-CONTROL to select BBE. BBE appears in the display. 2 Press MULTI-CONTROL to turn BBE on. # To turn BBE off, press MULTI-CONTROL again. En 61