Pioneer DEH-P980BT Owner's Manual - Page 87

Audio Adjustments Section 15 English 2 Use MULTI-CONTROL to select 16-band graphic equalizer adjustment. FREQ. appears in the display. 3 Push MULTI-CONTROL left or right to select the equalizer band to adjust. Each time MULTI-CONTROL is pushed left or right, equalizer bands are selected in the following order: 20-31.5-50-80-125-200-315-500- 800-1.25k-2k-3.15k-5k-8k-12.5k- 20k (Hz) 4 Push MULTI-CONTROL up or down to adjust the level of the equalizer band. Each time MULTI-CONTROL is pushed up or down, the level of the equalization band increases or decreases. +6 to -6 is displayed as the level is increased or decreased. # You can then select another band and adjust the level. 5 Press BAND to cancel the 16-band graphic equalizer adjustment. Using BBE sound With BBE, playback very close to the original sound can be obtained by correction with a combination of phase compensation and high-range boost for the delay of the high-frequency components and the amplitude deviation occurring during playback. This function makes it possible to reproduce the dynamic sound field as if you are listening to a live performance. With BBE sound processing technology, you can adjust the level of BBE. 1 Use MULTI-CONTROL to select BBE. BBE appears in the display. 2 Press MULTI-CONTROL to turn BBE on. # To turn BBE off, press MULTI-CONTROL again. 3 Push MULTI-CONTROL up or down to adjust the level of BBE. Each time MULTI-CONTROL is pushed up or down, the level of BBE increases or decreases. +4 to -4 is displayed as the level is increased or decreased. Note Manufactured under license from BBE Sound, Inc. The mark BBE is a trademark of BBE Sound, Inc. Using compression and BMX Using the COMP (compression) and BMX functions let you adjust the sound playback quality of this unit. Each of the functions has a two-step adjustment. The COMP function balances the output of louder and softer sounds at higher volumes. BMX controls sound reverberations to give playback a fuller sound. Listen to each of the effects as you select through them and use the one that best enhances the playback of the track or CD that you are listening to. ! When tuner, television or AUX is selected as a source, you cannot select COMP/BMX. 1 Use MULTI-CONTROL to select COMP/BMX. COMP/BMX appears in the display. 2 Press MULTI-CONTROL to turn COMP/ BMX on. # To turn COMP/BMX off, press MULTI-CONTROL again. En 87