Pioneer DJM-500 Owner's Manual - Page 4

CAUTIONS REGARDING HANDLING Location Install the unit in a well-ventilated location where it will not be exposed to high temperatures or humidity. Do not install the unit in a location which is exposed to direct rays of the sun, or near stoves or radiators. Excessive heat can adversely affect the cabinet and internal components. Installation of the unit in a damp or dusty environment may also result in a malfunction or accident. (Avoid installation near cookers etc., where the unit may be exposed to oily smoke, steam or heat.) Condensation When this unit is brought into a warm room from previously cold surroundings or when the room temperature rises sharply, condensation may form inside, and the unit may not be able to attain its full performance. In cases like this, allow the unit to stand for about an hour or raise the room temperature gradually. Cleaning the unit • Use a polishing cloth to wipe off dust and dirt. • When the surfaces are very dirty, wipe with a soft cloth dipped in some neutral cleanser diluted five or six times with water and wrung out well, then wipe again with a dry cloth. Do not use furniture wax or cleaners. • Never use thinners, benzene, insecticide sprays or other chemicals on or near this unit, since these will corrode the surfaces. CHECKING ACCESSORIES • Power cord • Short-circuit pin plug (four) These are inserted in the PHONO 1 and PHONO 2 terminals at the rear. • Operating instructions 4