Pioneer DVD-V5000 Owner's Manual - Page 12
Connecting using the, S-video output, component video out
UPC - 012562689661
View all Pioneer DVD-V5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
02 Connecting up Connecting using the S-video output If your TV (or other equipment) has an S-video input, you can use this instead of the standard (composite) output for a better quality picture. • Use an S-video cable (not supplied) to connect the S-VIDEO OUT to an S-video input on your TV (or monitor or AV receiver). Line up the small triangle above the jack with the same mark on the plug before plugging in. Connecting using the component video output You can use the component video output instead of the standard video out jack to connect this player to your TV (or other equipment). This should give you the best quality picture from the three types of video output available. • Use a component video cable (not supplied) to connect the COMPONENT VIDEO OUT jacks to a component video input on your TV, monitor or AV receiver. S-VIDEO IN COMPONENT VIDEO IN TV TV When COMPONENT VIDEO OUT is set to Progressive, there is no video output from the S (S-video) jack. If you want to display video on the monitor, make sure that it is set to Interlace. Press PROGRSSIVE on the front panel to switch the player back to Interlace. • Only NTSC video is output when set to progressive scan. • To set up the player for use with a progressive scan TV, see About progressive scan video on page 15. 12