Pioneer F-93 Operating Instructions - Page 3

CONTENTS FEATURES CONFIRM SUPPLIED ACCESSORIES CONNECTIONS ANTENNA CONNECTIONS REAR PANEL FACILITIES FRONT PANEL FACILITIES 3 LISTENING TO BROADCASTS 11 3 DIRECT ACCESS TUNING 12 4 FINE TUNING 12 6 PRESETTING STATIONS I 7 TROUBLESHOOTING 14 8 SPECIFICATIONS IF., FEATURES High Receivability. • A new-type front end for improved ability to eliminate interference. • New-type IF circuitry provides improved selectivity. • New-type MPX noise reduction delivers high sound quality. High Specification • High SIN ratio low distortion, and superior separation with the D.D.D. (Digital Direct Decoder) Type IV. High Sound Quality • FDNR type audio stage L.P.F. • Anti-vibration design features such as the honeycomb chassis. . • Spectrum Simulated Stereo lets you enjoy a stereo effect with monaural sources. High Controllability • Direct access tuning function. • Fine tuning function. • Auto operation function. • 40-station random presets incorporating CLASS function. • Two sets of output jacks for fixed or adjustable output level. CONFIRM SUPPLIED ACCESSORIES AM loop antenna FM T-type antenna • For U.K. model $ D2 • For other destination models CHANNEL STEP/FM DE-EMPHASIS SWITCH Only multi-voltage models are provided with this switch. The unit has been factory preset to the channel allocation and de- emphasis value for the area in which it is to be sold. If these values are set incorrectly, the frequency display may stop at the wrong frequency, or sound may be distorted, resulting in an inability to reproduce reception signals at their proper sound quality. For this reason, be sure to confirm that the values are set correctly before first using the unit. r CHAMEL STEP -ss FM 50KHr I OOKHr I 'oIr 50,5 75faS LI Sk i EMPHASIS Connecting cord with pin plugs Antenna adaptor* 300 - 75 0 Control cord * Not attached ca U.K. model [100 kHz/10 kHz/75µs] position: Set to this position for areas with FM reception step of 100 kHz, AM 10 kHz, and de-emphasis 75 µs. [50 kHz/9 kHz/50 µs] position: Set to this position for areas with FM reception step of 50 kHz, AM 9 kHz, and de-emphasis of 50 µs. NOTE: When unsure about the channel allocation and de-emphasis values for your area, consult your dealer for correct information. The channel step will not change if this switch is operated with the power ON. After operating this switch, if you turn die POWER switch OFF and then ON again the channel step will switch over. If you operate this switch, the stations that were memorized before the switch was operated will be erased. 3