Pioneer FH-X720BT Owner's Manual - Page 14

NOTE TuneStart is compatible with SXV200 or later tuner models. Not compatible with SXV100. TuneScan™ Scan through short previews of songs you may have missed on music channels stored on the current band of presets. Each song in the current channel plays for six seconds at a time. For details, refer to TUNE SCAN (scanning the songs) on page 16. NOTE TuneScan is compatible with SXV200 or later tuner models. Not compatible with SXV100. TuneMix™ Create a music channel that's a blend of songs made up from the music channels stored on the current band of presets. For details, refer to TUNE MIX on page 16. NOTE TuneMix™ is compatible with the SXV300 or later tuner models. Not compatible with the SXV200 or SXV100. Preparing for the SiriusXM Satellite Radio service 1 Press SRC/OFF to select [SIRIUSXM]. 2 Press / to select Channel 0. The Radio ID appears on the display. In addition, the Radio ID is located on the bottom of the SiriusXM Connect Vehicle Tuner. NOTE The Radio ID does not include the letters I, O, S or F. 3 Activate the SiriusXM service online or by phone. For US Subscriptions: • Visit www.siriusxm.com/activatenow • Call SiriusXM Listener Care at 1-866-635-2349 For Canadian Subscriptions: • Visit www.xmradio.ca and click on "ACTIVATE RADIO" in the top right corner • Call 1-877-438-9677 4 [SUBSCRIPTION UPDATED] appears on the display when your SiriusXM Connect Vehicle Tuner has been subscribed successfully. Press any key to clear the activation message. NOTE The activation process usually takes 10 minutes to 15 minutes but may take up to an hour in some cases. Do not turn off the unit until you clear the activation message in step 4. 14 En Listening to a channel 1 Press /DIMMER, then select [CHANNEL]. You can also select the operation mode by the FUNCTION settings (page 15). 2 Press SRC/OFF to select [SIRIUSXM]. 3 Press BAND/ to select a band from [SXM1], [SXM2] or [SXM3]. 4 Press / to select a channel. Pressing and holding either button will rapidly browse through the channels. Press and hold either button then release to tune automatically. Scanning stops when the unit receives a station. To cancel seek tuning, press / . Basic operations 1 Press /DIMMER to select the operation mode [CHANNEL] or [REPLAY]. Purpose Select a channel Skip backward/forward Fast forward or reverse Operation 1 Set the operation mode to [CHANNEL]. 2 Press or . Pressing and holding either button will rapidly browse through the channels. 1 Set the operation mode to [REPLAY]. 2 Press or . 1 Set the operation mode to [REPLAY]. 2 Press and hold or . NOTE You can also make various adjustments in the FUNCTION settings (page 15). Category scan The live broadcast for each channel in the current category plays for six seconds at a time. Follow the steps below. To search for a channel from a list 1 Press during playback. 2 Turn the M.C. dial to select a category. 3 Select one of the operations below. Category scan: Press and hold the M.C. dial to switch to category scan. Channel search: Press the M.C. dial to tune into a channel.