Pioneer GM-A5702 Owners Manual - Page 12

Connecting the units 2 Twist the battery wire, ground wire and system remote control wire. Twist 3 Attach lugs to wire ends. Use pliers, etc., to crimp lugs to wires. 6 Ground wire 7 System remote control wire Connecting the speaker output terminals 1 Use wire cutters or a utility knife to strip the end of the speaker wires to expose about 10 mm (3/8 in.) of wire and then twist the wire. Twist 1 Lug (sold separately) 2 Battery wire 3 Ground wire 4 Connect the wires to the terminal. Fix the wires securely with the terminal screws. 2 Attach lugs to wire ends. Use pliers, etc., to crimp lugs to wires. 1 System remote control terminal 2 Ground terminal 3 Power terminal 4 Terminal screws 5 Battery wire 1 Lug (sold separately) 2 Speaker wire 3 Connect the speaker wires to the speaker output terminals. Fix the speaker wires securely with the terminal screws. En