Pioneer GM-A5702 Owners Manual - Page 5
Before you start
View all Pioneer GM-A5702 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Before you start ! When installing the amplifier, do not allow parts such as extra screws to get caught between the amplifier and the automobile. Doing so could cause malfunction. ! Do not allow this unit to come into contact with liquids. Electrical shock could result. Also, damage to this unit, smoke, and overheating could result from contact with liquids. The surfaces of the amplifier and any attached speakers may also heat up and cause minor burns. ! In the event of any abnormality, the power supply to the amplifier is cut off to prevent equipment malfunction. If this occurs, switch the system power off and check the power supply and speaker connections. If you are unable to determine the cause, please contact your dealer. ! Always disconnect the negative * terminal of the battery beforehand to avoid the risk of electric shock or short circuit during installation. ! Do not attempt to disassemble or modify this unit. Doing so may result in fire, electric shock or other malfunction. ! The power indicator will turn off and the amplifier will shut down in the situations outlined below. - If the speaker output terminal and speaker wire are short-circuited. - If a DC voltage is applied to the speaker output terminal. ! The amplifier will reduce the power output if the temperature inside the amplifier gets high. If the temperature gets too high, the power indicator will turn off, and the amplifier will shut down. Important (Serial number) The serial number is located on the bottom of this unit. For your own security and convenience, be sure to record this number on the enclosed warranty card. Note Before installing this unit in your vehicle, refer to the illustration below and remove the tag (GMA5702 only). Do not use the parts you have removed (screws etc.) when installing the unit in your vehicle. CAUTION ! Always keep the volume low enough to hear outside sounds. ! Extended use of the car stereo while the en- gine is at rest or idling may exhaust the bat- tery. ! This product is evaluated in moderate and tro- pical climate condition under the Audio, video and similar electronic apparatus - Safety re- quirements, IEC 60065. ! The graphical symbol placed on the product means direct current. About the protection function This product has protection function. When this product detects something abnormal, the following functions will operate to protect the product and speaker output. En